Overview
The Rigid Industries D2 XL Series LED driving light, part number 322613, is a high-intensity LED light for drivers who need a bigger beam than a standard D-Series pod. It is universal fit, so it can be mounted on off-road rigs, power sports machines, commercial trucks and emergency vehicles wherever the bracket and housing fit.
Rigid positions the D-XL PRO as its top-output version of the larger D-Series housing. The company credits recent LED work with raising raw output by up to 170%, while keeping the light efficient. Shoppers who want a single, bright, rugged driving light for off-road, mining, agriculture or fire and rescue work will find it fits that job. The beam pattern you choose sets whether the light favors long reach or a wide floor of light.
Key features
- Up to 170% more raw lumens from the Professional Race Output LEDs
- Unbreakable polycarbonate lens
- Durable UV-resistant polyester powder coat
- Stainless steel hardware
- Vibration isolator between the light and its mount
- Available with a choice of beam pattern optics
Beam pattern and aim
Choosing a driving light comes down to the beam pattern you need. Spot optics reach farther down a trail or road, while flood optics spread light across a wider area close to the vehicle. Think about how you drive most: fast open terrain favors reach, and tight trails or work sites favor width. Match the pattern to your usual speed and terrain before you order.
The aim makes or breaks a driving light, so set it on level ground with the vehicle at normal load. Tilt the light just enough to keep the hot spot ahead of the front wheels. Check the mounting bolts after the first few trips, because vibration can shift the aim over time. Keep the lens clean, since mud and road film cut output more than most owners expect.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 322613 |
| UPC | 849774027642 |
| Housing size | 4×4 |
| Raw lumens | Up to 170% more |
| Lens | Unbreakable polycarbonate |
| Finish | UV-resistant polyester powder coat |
| Hardware | Stainless steel |
| Type | Driving light |
| Fitment | Universal fit |
Vehicle fitment
This driving light is universal fit and is not designed for a single vehicle. Confirm that the mounting location gives room for the 4×4 housing and that the light will not interfere with grille, bumper or hood clearance.
Installation notes
Run the light through a fused relay so the switch carries only the control current, not the full load. Driving lights are subject to local road-use rules, so check them before using the light on public roads. Set the aim with the vehicle on level ground, since a tilted pattern throws light into the wrong area.
What’s included
Mounting hardware, a wiring harness and lens color are not part of the kit. Check the contents on arrival.









