Overview
The Smittybilt 614833 is an M1 rear bumper for 2015–2018 Ford F-150 pickups, including the King Ranch, Lariat, Limited, Platinum, SSV and XLT versions.
It is built from 3/16-inch and 1/4-inch cold roll steel with 1/4-inch mounting plates, and it has a two-stage matte black powder coat. Solid mount D-rings are welded inside and outside. It bolts on with no drilling.
Key features
- Solid mount D-rings welded inside and out
- Two-stage matte black powder coat finish
- 3/16-inch and 1/4-inch cold roll steel construction
- 1/4-inch mounting plates
- Bolt-on installation with no drilling
Ford F-150 Rear Bumper Installation
A rear bumper on a half-ton pickup protects the bed sides and tailgate area and gives a mount for recovery points. Before installing, look at the tailgate, the bed-side steps and the rear body for clearance. Check that the bumper’s mounting points line up with the truck’s frame before tightening any fasteners, and keep the fasteners snug until the whole bumper is seated.
Rear bumpers can trap road spray and salt, which accelerates rust at the mounting points. Rinse the rear area after wet or winter trips and inspect the plates for bare steel. Touch up powder coat chips early, and re-check the fasteners after the first few drives.
- Check tailgate and bed-side clearance before final tightening
- Rinse salt and mud from the mounting points after wet trips
- Re-check fasteners after the first few drives
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 614833 |
| UPC | 631410125375 |
| Product line | M1 |
| Position | Rear |
| Fitment type | Direct fit |
| Material | 3/16-inch and 1/4-inch cold roll steel |
| Finish | Two-stage matte black powder coat |
| D-ring mount | Solid mount, 7/8-inch; the D-ring mount is not included |
| Receiver hitch | Not included |
| Tire carrier | Not included |
Vehicle fitment
It fits the 2015–2018 Ford F-150 pickups, including the King Ranch, Lariat, Limited, Platinum, SSV and XLT versions.
It does not fit 2014 and earlier or 2019 and later F-150 models, or Super Duty trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts on and requires no drilling.
What’s included
The bumper.
Not included: Confirm fit for your vehicle’s year, model and trim before ordering. Check the D-ring mount hardware against your installation before starting.




















