Overview
The Smittybilt 97510 is the X2O 10K GEN2, a waterproof wireless winch rated for 10000 lb with cable and a roller fairlead. The X2O line is built around performance and trouble-free operation.
The winch has a sealed, series-wound 6.6 hp motor and a three-stage planetary gear train. Smittybilt says its optimized gear ratios deliver quick line speeds, and its 500 amp solenoid pack is completely waterproof and mounts in one of two locations.
The controller can be wired to the winch or unplugged for wireless use, and the remote control has a 12 ft. lead. Smittybilt backs the winch with a Lifetime Mechanical Warranty and a 3 Year Electrical Warranty.
Because this model uses cable, its line type differs from the synthetic rope Comp Series version of the same X2O line. Choose the line type that suits the recovery work you do most.
Key features
- 10000 lb rated line pull
- Sealed 6.6 hp series-wound motor
- Three-stage planetary gear train
- Waterproof 500 amp solenoid pack, mountable in two locations
- Wireless controller that can also be wired to the winch
- Roller fairlead on cable
Wet-weather winching care
Waterproof rated electrical parts still benefit from routine checks. After a river crossing or a muddy recovery, rinse the winch body with low pressure water, dry the solenoid housing and look at the terminal connections for corrosion. A light dielectric grease on connectors helps keep moisture out between trips. Sealed motors protect the internal windings, but seals can crack over time, so check gaskets at each service.
Winch line choice also shapes wet-weather use. Cable picks up grit and mud on the drum, so keep it wiped and lightly lubricated, and feed it onto the drum under tension. Wireless remote use is convenient, but it should not replace a visual check of the line and anchor point. Store the remote in a dry spot and keep its lead away from the cable path.
- Rinse mud off the winch body after use
- Check solenoid connectors for corrosion
- Keep the remote dry when not in use
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 97510 |
| UPC | 631410119534 |
| Rated line pull | 10000 lb |
| Motor | 6.6 hp, series wound, sealed |
| Gear train | 3-stage planetary |
| Solenoid pack | 500 amp, waterproof, two mounting locations |
| Fairlead | Roller |
| Line type | Cable |
| Remote control | 12 ft. lead, wired or wireless |
| Warranty | Lifetime mechanical, 3 year electrical |
Vehicle fitment
Fit depends on the bumper and mounting plate on your vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the solenoid pack in one of its two mounting locations before tightening anything, and route the remote lead away from the cable path. Keep hands and clothing clear of the cable whenever the winch is under load.
What’s included
The remote control is included. Mounting hardware and the battery leads aren’t itemized, so confirm them with Smittybilt before ordering.




























