Overview
The Crown Automotive replacement steel hood, part J5761180, is a pre-drilled, primed hood for Jeep J-series vehicles from 1972 to 1986. It fits the J-2500, J-2600 and J-4800 Base models from 1972–1973, and the J10 and J20 Base models from 1974–1986.
The panel arrives primed as a rust inhibitor only and needs priming before painting. Crown Automotive has made Jeep replacement parts for over 50 years.
Key features
- Steel panel with pre-drilled holes
- Primed to inhibit rust, with no topcoat applied
- Needs priming before painting
- Fits J-2500, J-2600, J-4800, J10 and J20 Base models
- Crown recommends professional installation
Rust and paint on older panels
Older J-series trucks often have rust in the cowl, hinge pockets and the hood’s underside, so inspect the surrounding metal before fitting a new panel. Clean away loose scale, treat any spots with a rust converter, and let the area dry fully. A hood with fresh primer on a clean base holds paint far longer than one fitted over corroded metal.
Pre-drilled holes help line up the hood, but they do not guarantee a perfect fit on every truck. Set the hood on the hinges loosely, mark any contact points, and adjust before final bolting. Keep the bolt holes clean of paint before fitting. Spare hinge bolts and a few shims can make small alignment changes easier, and a helper makes the job much safer with a steel panel.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5761180 |
| UPC | 848399066456 |
| Material | Steel |
| Finish | Primed, rust inhibitor only |
| Holes | Pre-drilled |
| Fitment type | Direct fit |
Vehicle fitment
Crown’s manufacturer fitment list covers 1972–1973 Jeep J-2500, J-2600 and J-4800 Base models, plus 1974–1986 J10 and J20 Base models.
Other J-series trims and years outside 1972–1986 are not part of this fit. Verify the year, model and trim against your vehicle before buying.
Installation notes
The panel needs priming before painting, so plan a prep and paint step before it is fitted. The panel is pre-drilled, and Crown recommends professional installation for this steel body panel.
What’s included
One steel hood, primed. Hinges, latches and other hardware are not part of the package, so check the parts you need before starting.








