Overview
The Smittybilt Defender Rack Light Cage, part 45002, is a black powder coat cage that protects four 9-inch diameter lights. It bolts directly to the Smittybilt Defender roof rack and is built from 16-gauge, fully welded 1-inch round steel tubing.
The cage is sized to match the tubing of the Defender rack. Lights and wiring are not included.
Key features
- Fully welded 16-gauge, 1-inch round steel tubing
- Protects four 9-inch diameter lights
- Black powder coat finish
- Bolts directly to the Defender roof rack
Wiring and light placement
Rooftop lights work best when they are aimed carefully and wired neatly. Route the harness along the rack tubing and secure it with clips so it does not rub or catch wind. Lights mounted in the cage should be aimed low enough to light the trail without glaring into oncoming traffic.
A light cage adds weight and wind load above the vehicle, so it is worth checking the rack and roof before mounting. Use a fuse close to the power source and a switch the driver can reach. Keep the connections dry and sealed, since water in the harness is a common cause of flickering lights.
Vibration on rough trails can slowly loosen cage fasteners and shift the lights out of position. Check the bolts and aim after each long off-road outing.
- Clip the harness every few inches along the tubing
- Use a fuse near the battery
- Recheck light aim after rough trail runs
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 45002 |
| UPC | 631410115239 |
| Type | Roof-mounted light cage |
| Material | 16-gauge, fully welded 1-inch round steel tubing |
| Light capacity | Four 9-inch diameter lights |
| Finish | Black powder coat |
| Weight | 18 lbs |
Vehicle fitment
It is built for the Smittybilt Defender roof rack. Check fit against your vehicle’s year, model and trim before buying.
What’s included
The cage is sold alone. Lights and wiring are not included.









