Overview
The Smittybilt JB48-RHT is a tubular rear bumper with a built-in tow hitch receiver for Jeep vehicles, finished in textured black.
The bumper is a tubular design, custom crafted for Jeeps with a 1-piece design, pre-cut vertical uprights and robotic welding. It bolts directly to the vehicle without drilling or modifications, and its hitch has a 2,000 lb tow weight. It is made for 2 and 4-door Jeep models.
Key features
- Rear bumper with added tow hitch receiver
- Hitch has a 2,000 lb tow weight
- Textured black finish
- Dense zinc treated undercoating
- Robotically welded, 1-piece design
- Bolts directly to the vehicle with no drilling or modifications
- Backed by a 5 year limited warranty
Towing and hitch use
A receiver hitch on a rear bumper is only as capable as its mounting points and the weight it carries. Before towing, check that the trailer’s loaded weight stays within the hitch rating and that the tongue weight is in the right range. Use a hitch ball and pin rated for the load and inspect them before each trip.
The textured black powder coat and zinc treated undercoating help protect the steel from road salt and trail moisture, but chips still need attention. Touch up scratches with a matching paint, and check the bumper bolts after the first few trips because rough trails loosen fasteners over time. Keep the hitch receiver free of mud and rust so ball mounts go in easily.
- Inspect the hitch receiver for cracks or rust around the welds
- Keep the hitch pin and clip in place whenever a ball mount is used
- Recheck bumper bolts after rough trail use
- Carry a spare hitch pin for longer trips
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | JB48-RHT |
| UPC | 631410087628 |
| Product type | Tubular rear bumper with hitch |
| Position | Rear |
| Finish | Textured black powder coat |
| Undercoating | Dense zinc treated |
| Hitch tow weight | 2,000 lb |
| Receiver hitch | Yes |
| Tire carrier | No |
| D-ring mounts | Not included |
| Body styles | 2 and 4-door models |
| Warranty | 5 year limited |
Vehicle fitment
The bumper is made for Jeep vehicles in 2 and 4-door body styles. Fit depends on the specific model and year, so confirm your Jeep’s year, model and trim before ordering.
Because no model or year range is given, do not assume it covers every Jeep generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts directly to the vehicle without drilling or modifications. Its hitch receiver is rated for a 2,000 lb tow weight, so match any trailer to that figure.
What’s included
- Rear bumper with integrated tow hitch receiver
Not included: D-ring mounts and a tire carrier.












