Overview
The Smittybilt M1 Fender Flare Set, part number 17491, is a paintable set of four flares for the front and rear of a truck.
The features say the set adds 2 inches of tire clearance. The ABS flares are heat resistant and UV treated to resist fading, and they can be painted to match the body. The set comes with mounting hardware, rubber gaskets and rivets, and installation needs no drilling.
Key features
- Front and rear flares, sold as a set of four
- Adds 2 inches of tire clearance, per the features
- Paintable
- UV treated to resist fading
- Mounting hardware and instructions included
- No drilling required
Fender flares and tire fit
Fender flares cover the tire and body opening, so the main concern is how the tire sits under the flare at full steering lock and full suspension travel. Tire width, offset and suspension lift all change that clearance. Measure the wheel well and tire size before mounting, and check the flare against the body edge to confirm it sits where it belongs.
Paintable flares need a fresh finish that matches the body. Clean and scuff the surface, use a plastic adhesion primer, then build color in thin coats so the paint stays flexible on a flexing panel. Install the rubber gaskets and rivets with care, and check for gaps after the first drive, since loose flares can rattle or work against the body.
- Check steering lock with the flares fitted
- Compare the tire width with the flare width
- Keep the mounting kit and instructions together
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 17491 |
| UPC | 631410117059 |
| Material | ABS, heat resistant and UV treated |
| Position | Front and rear |
| Quantity | Set of four |
| Finish | Paintable |
| Fit type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The set includes the hardware, rubber gaskets and rivets needed for mounting, so no drilling is required. Keep the instructions with the set when you mount the flares.
What’s included
The set includes four flares for the front and rear, plus mounting hardware, rubber gaskets, rivets and instructions.


























