Overview
The Smittybilt 17490 is an M1 fender flare set for the 2002 to 2007 Dodge RAM, for trucks with 6.5-foot and 8-foot beds. The flares add tire coverage and give the truck a rugged, off-road look. They add 1 in. of tire clearance, and the flare height is 4.5 in. Confirm the model and bed length for your truck before ordering.
The flares are made from an OEM-quality ABS material that Smittybilt describes as heat resistant and UV stable. They can be painted if you prefer the body color. No drilling is required, and the set includes all the hardware, rubber gaskets and rivets needed to mount it.
Key features
- Adds 1 in. of tire clearance
- Flare height of 4.5 in.
- Front and rear flares sold as one set
- OEM-quality ABS material, heat resistant and UV stable
- Paintable finish
- No drilling required, with rubber gaskets and rivets included
Choosing flares for your truck
Fender flares change how a truck looks and how the tires sit in the wheel well, so choose a set that matches your tire size and bed configuration. The M1 style is aimed at a rugged look, but the actual gain in coverage depends on wheel offset and tire width. Measure the gap between tire and fender before ordering.
Painted flares need a clean, dry surface and a primer suited to plastic before the topcoat goes on. Keep the paint thin and let each coat cure, since heavy coats can crack at the flexing edges. Use the included gaskets and rivets exactly as directed so the seal stays tight against water.
Check the flares after rough trail use, looking at the rivets and the rubber gaskets for wear. Replace any gasket that has hardened or torn, because water getting behind the flare can cause rust on the fender.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 17490 |
| UPC | 631410115406 |
| Vehicle | Dodge RAM, 2002 to 2007 (model not named) |
| Bed length | 6.5 ft and 8 ft |
| Position | Front and rear |
| Sold as | Set |
| Added tire clearance | 1 in. |
| Flare height | 4.5 in. |
| Material | OEM-quality ABS, heat resistant and UV stable |
| Finish | Paintable |
| Installation | No drilling required |
| Included | Mounting hardware, rubber gaskets, rivets, instructions |
Vehicle fitment
The set is for 2002 to 2007 Dodge RAM trucks with 6.5-foot and 8-foot beds. Confirm the 1500 or 2500 model and your exact truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is required, and the rivets and rubber gaskets are supplied for the mounting. Follow the instructions included with the set.
What’s included
A front and rear set of M1 flares with the mounting hardware, rubber gaskets, rivets and instructions.














