Overview
The Crown Automotive 5FWK is a gloss black fender flare kit for the 1997 to 2001 Jeep Cherokee XJ. The kit includes four flares for the front and rear, along with the hardware. Width and coverage are stock. It fits the Cherokee XJ Classic, Country, Limited, SE and Sport versions.
The flares can be painted if a different color is needed. Check the front and rear pieces against the factory openings before installing, and take the time to fit each flare before final tightening.
Key features
- Four flares covering the front and rear
- Hardware included
- Gloss black finish, paintable
- Width and coverage are stock
- Fits the 1997 to 2001 Jeep Cherokee XJ
Gloss finish and fit checks
A gloss black flare shows every mark, so surface prep matters before mounting. Clean each piece with mild soap and water, then dry it fully so the mounting area does not trap moisture. Lay the front and rear pieces against their openings and check the edge alignment on both sides of the vehicle before drilling anything.
On a Cherokee XJ, the wheel openings are a common place where small misalignment shows. Check gaps at the front and rear of each flare, and make sure the top edge sits level with the body line. If you plan to paint the flares, use a paint suited to flares and allow full cure time before mounting. Re-check fasteners after the first few drives, particularly on rough roads.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5FWK |
| UPC | 848399092615 |
| Position | Front and rear |
| Width and tire coverage | Stock |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Finish | Gloss black, paintable |
| Model years | 1997 to 2001 Jeep Cherokee (XJ) |
Vehicle fitment
It fits the 1997 to 2001 Jeep Cherokee (XJ). Cherokee years outside the XJ range are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the front and rear pieces with the factory openings before installing.
What’s included
Four gloss black fender flares with hardware.









