Select your vehicle

Skyjacker Shock Absorber Boot – B10LB

Skyjacker

Shop Skyjacker Shock Absorber Boot on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Shock boot protecting the chrome-hardened piston rod
  • Keeps out dirt, dust, mud and other contaminants
  • Universal fit; confirm size before use

Description

Overview

The Skyjacker B10LB is a shock absorber boot that protects the chrome-hardened piston rod of a shock from dirt, dust, mud and other contaminants.

Keeping contaminants off the rod helps extend shock life. It is a universal-fit boot, so measure your shock body and rod length before installing it.

Key features

  • Protects the chrome-hardened piston rod of the shock
  • Keeps dirt, dust, mud and other contaminants off the rod
  • Keeping the rod clean helps extend the life of the shock.

Keeping the rod clean

A shock absorber’s piston rod moves in and out of the shock body with every bump, and it carries road grime each time it extends. A rubber boot covers the exposed section of chrome rod so that dirt, dust and mud do not work past the seal. Once grit reaches the seal, it can scratch the rod and let oil escape, which is why boots matter most on trucks that run gravel roads, mud or sand.

Inspect the boot during routine service. Look for splits, cuts or a boot that has slid partly off the rod, and wipe the exposed rod after trail runs. Dirty rods shorten seal life, so a damaged boot is worth replacing before the shock itself starts to weaken. Boots are often replaced along with bushings and mounts when the suspension is serviced.

Specifications

Brand Skyjacker
Part number B10LB
UPC 803696115702
Product type Shock absorber boot
Purpose Protects the chrome-hardened piston rod from contaminants
Fit type Universal fit
Manufacturer SKU SKYB10LB

Vehicle fitment

It is a universal-fit boot and is not tied to a specific vehicle. Measure your shock’s body and rod length before ordering.

A shock boot must suit the shock body and rod length. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Use the recommended steps and torque values for your vehicle. Support the vehicle on jack stands rather than a jack alone while working underneath it, and re-check the fasteners once the vehicle has been driven a few miles.

SKU: SKYB10LB Category:

Specification

Shipping weight 0.50 lbs
Package dimensions 6.50 × 6.00 × 3.50 in
brands

Questions & Answers

What does the Skyjacker B10LB shock boot do?

It covers the shock's chrome-hardened piston rod to keep out dirt, dust, mud and other contaminants. Keeping the rod clean helps extend shock life.

Does the Skyjacker B10LB fit any shock?

It is a universal-fit boot, so fit depends on your shock. Measure the body and rod length of your shock before ordering.

What is a shock boot used for?

A shock boot is a cover that slides over the shock's piston rod. The Skyjacker B10LB protects the chrome-hardened rod from dirt, dust, mud and other contaminants, which Skyjacker says extends the life of your shocks.

How can I tell if a shock boot has failed?

Look for splits, cuts or a boot that has slid off the rod. Oil or grime on the rod surface and a dirty seal area also show that contaminants are getting past the boot. Replace the boot before the seal fails.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Skyjacker Shock Absorber Boot on Amazon