Overview
The Skyjacker 7003 is an OEM replacement steering stabilizer kit for 2007–2016 Jeep Wrangler JK models, including Rubicon and Unlimited, sold under the Hydro 7000 HD name. Part number 7003, UPC 803696190785.
Skyjacker says its steering stabilizers restrain bump steering and front-end vibration. The general description says most kits include brackets, hardware and a polyurethane boot for on-road and off-road protection. The specifications list brackets as not included, so check the package contents before installing.
Key features
- OEM replacement that fits the factory mounting locations
- Covers 2-door and 4-door JK Wrangler models
- Single stabilizer in the Hydro Series
- Red shock boot included
- Polyurethane boot for on-road and off-road protection.
Steering stabilizer wear on the JK
The Wrangler JK uses a relatively heavy front axle and large tires, which put steady loads on the steering linkage. A stabilizer helps control the oscillation that these loads can produce, especially on rough trails or after tire changes. Over time the cylinder seals and mounting bushings wear, and the damping effect fades.
When replacing the stabilizer, inspect the track bar, drag link and tie rod ends for play as well. A worn joint elsewhere can produce the same symptoms as a failing stabilizer. Keep the boot in good condition, since grit and water that reach the rod can accelerate seal wear.
- Look for fluid leaks at the seals
- Check the boot for cracks or splits
- Inspect mounting bushings for wear
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7003 |
| UPC | 803696190785 |
| Application | OEM replacement |
| Single or dual | Single |
| Brackets | Not included |
| Shock boot | Red |
| Type | Stabilizer only |
| Series | Hydro Series |
| Fitment type | Direct Fit |
Vehicle fitment
This stabilizer fits 2007 to 2016 Jeep Wrangler JK models, including Rubicon and Unlimited, in 2-door and 4-door versions.
Wrangler JL models from 2018 on, and TJ, LJ and other Wrangler years outside 2007 to 2016, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stabilizer mounts in the factory locations. Because the specifications list brackets as not included, check the package for brackets and hardware before you start the job.
What’s included
One stabilizer with a red shock boot. Not included: brackets.









