Overview
The Skyjacker 7007 is an HD OEM replacement steering stabilizer, part number 7007 and UPC 803696109565, with a red shock boot and a Limited Lifetime Warranty. It is a single-cylinder Hydro Series unit for Dodge Ram pickups from 1994 to 2002.
The fitment section below shows the Ram trucks and years covered, and brackets are not included with the cylinder.
Key features
- HD OEM replacement design for Dodge Ram trucks
- Red shock boot
- Single-cylinder configuration in the Hydro Series
- Limited Lifetime Warranty
Steering stabilizer care
A steering stabilizer on a Dodge Ram works in the front steering system to damp side movement that comes from rough roads and uneven terrain. Its condition shows up in the steering wheel, so a unit that is losing its damping can produce shake, drift or a loose feel. Checking it along with the tie rod ends and drag link gives a clearer picture of what is happening up front.
Care is mostly visual and mechanical. Look for leakage around the cylinder seals, cracks in the red boot, and movement at the mounts when the steering is turned. Keep the boot free of grit and mud where possible, and tighten fasteners after installation. When the stabilizer is replaced, inspect the old brackets too, since worn brackets can reduce the new unit’s effect.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7007 |
| UPC | 803696109565 |
| Series | Hydro Series |
| Type | Stabilizer only |
| Configuration | Single |
| Boot | Red shock boot |
| Warranty | Limited Lifetime |
| Fitment | Direct fit |
| Brackets | Not included |
Vehicle fitment
The 7007 fits the 1994 to 2001 Dodge Ram 1500 in Base, LT, Laramie, ST and Sport trims; the 1994 to 2002 Ram 2500 Base; and the 1994 to 2002 Ram 3500 Base.
Ram years outside these ranges and non-Ram trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One HD OEM replacement steering stabilizer with a red shock boot.
Not included: brackets.









