Overview
The Skyjacker 9298 is a dual steering stabilizer kit in the Hydro Series, fitted to 3/4 ton Chevrolet and GMC trucks and SUVs. It damps the front steering, which reduces bump steering and front-end vibration. It is a stabilizer only, so it works alongside the existing steering parts rather than replacing them.
It fits the Chevrolet Avalanche 2500, Silverado 2500 HD and Silverado 2500 HD Classic, Tahoe, GMC Sierra 2500 HD and Sierra 2500 HD Classic, Yukon XL 2500 and Hummer H2 in the model years covered in the fitment section. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Dual kit configuration.
- Application noted as 3/4 ton vehicles
- Black polyurethane shock boot included
- Silver finish with black boots
- Hydro Series stabilizer, stabilizer only; it does not replace existing steering parts.
- It is a direct fit for the vehicles named in the fitment section.
Signs of wear and upkeep
A steering stabilizer sits between the frame and the steering linkage and damps quick input from the wheels, so the front end does not get knocked off line on rough ground. Dual cylinders spread that damping across the linkage. Because this kit is a stabilizer only, it works with the tie rods, drag link and other steering parts already on the truck and does not replace them.
Worn stabilizers often show up as fluid seeping from the body, a torn shock boot, or a steering wheel that wanders on the highway. Inspect the boots and body for cracks or wet spots, and check the mounting bolts for looseness. Stabilizers are often replaced along with worn tie rod ends and ball joints, since a loose joint pushes extra load onto the damper.
When choosing a setup, match the kit to the truck’s tire size and suspension height, and consider whether the front end already wanders or has bump steering before adding damping. Upgraded tires or a lift change steering geometry, so an alignment check after the work is a sensible step. Keep the boots clean and reinstall any dust cover removed during service.
- Fluid seeping from the cylinder body
- Cracked or torn shock boot
- Loose mounts or play in the steering
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 9298 |
| UPC | 803696213149 |
| Product type | Steering stabilizer kit |
| Configuration | Dual |
| Series | Hydro Series |
| Type | Stabilizer only |
| Application | For use with 3/4 ton vehicles |
| Finish | Silver with black boots |
| Shock boot | Black, included |
| Brackets | Brackets are not included. |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes the Chevrolet Avalanche 2500 from 2002 to 2006, Silverado 2500 HD from 2001 to 2010, Silverado 2500 HD Classic in 2007, Tahoe from 2000 to 2006, GMC Sierra 2500 HD from 2001 to 2010, Sierra 2500 HD Classic in 2007, Yukon XL 2500 from 2000 to 2006, and Hummer H2 from 2003 to 2009. Trim lists are given per model in the Fitment tab.
Half-ton and light-duty models are not on this list, and neither are years before or after the ranges above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not part of the kit, so compare the parts in the box with your installation plan before work begins. The install is a bolt-in job, so check the mounting points on your truck first. Work on the front steering only with the vehicle supported on stands.
What’s included
The kit includes the stabilizer and a black polyurethane shock boot. Brackets are not included.
Not included: Brackets are not included. Check the package contents against your installation before starting.








