Overview
The Skyjacker Hydro 7000 Dual Steering Stabilizer Kit, part number 7200, is a two-stabilizer complete kit for Jeep CJ and Wrangler YJ models, along with Commando, Jeepster and Scrambler vehicles. Its brackets, hardware and polyurethane boot come with the kit, which protects the unit from the elements.
The kit is designed for tires of 37 inches or larger. It will not work with a factory sway bar or spring over axle conversions, and it requires a 4-inch suspension lift.
Key features
- Dual steering stabilizer complete kit
- Brackets and hardware included
- Polyurethane boot protects the unit
- Red shock boot included
- Designed for 37-inch or larger tires
- Hydro Series design
Lift height and sway bar clearance
Dual steering stabilizer kits are generally used on vehicles where the axle sits at a different angle from stock, so the stabilizer geometry has to be set for that height. Lift height changes how the drag link and track bar move, and that movement affects how each stabilizer works. Before installing, measure the current lift and confirm it matches the requirement for the kit.
Larger tires add rotational mass and more steering load, which can make the stabilizers work harder on rough ground. Recheck the brackets and hardware after the first few trail runs, and inspect the polyurethane boots for cuts. A clean installation with correct geometry reduces early wear on the cylinders and mounting points.
- Measure lift before fitting
- Check sway bar and axle setup
- Recheck hardware after the first trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7200 |
| UPC | 803696112350 |
| Series | Hydro Series |
| Type | Complete kit, dual |
| Brackets and hardware | Included |
| Boot | Polyurethane, red |
| Tire size | 37 inch or larger tires |
| Lift requirement | 4-inch suspension lift |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers 1966 Jeep CJ3, 1959-1960 and 1966-1983 Jeep CJ5, 1959-1960 and 1966-1975 Jeep CJ6, 1976-1986 Jeep CJ7, 1966-1967 and 1972-1973 Jeep Commando, 1966-1971 Jeep Jeepster, 1981-1985 Jeep Scrambler, 1955-1958 Jeep Willys CJ-5, 1956-1958 Jeep Willys CJ-6 and 1987-1995 Jeep Wrangler (YJ). Trim details are in the Fitment tab.
The list does not include Wrangler TJ, Wrangler LJ or later Wrangler models, or Jeep Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check for a factory sway bar and for a spring over axle conversion before fitting, since this kit does not work with either. The kit requires a 4-inch suspension lift, so confirm your lift height first.
What’s included
Complete dual kit with brackets, hardware and a red polyurethane shock boot.









