Overview
The Corbeau passenger side seat bracket is a bolt-in mount for the four-door 2015-2017 Jeep Wrangler JK Unlimited and Rubicon Unlimited, with a black wrinkle finish. It is the passenger side counterpart to the driver side bracket for the same model years.
Corbeau designs this bracket to bolt straight to the factory floor holes, so it can be fitted with little to no modification. It comes with a single locking slider, and a double locking slider is offered as an option for an additional fee.
Key features
- Passenger side position
- Direct bolt-in fit to the existing floor bolt holes
- Black wrinkle powder coat finish
- Single locking slider standard, with the handle on the locking side
- Double locking slider upgrade uses a connecting bar that you pull up to move the seat
- Corbeau recommends double locking sliders for high-stress driving of any kind
Passenger side seat setup
The passenger seat sees the same daily load as the driver seat, so the mounting points deserve the same attention. Position the bracket on the floor holes, start every bolt by hand, and tighten them in a crisscross pattern. Check that the seat sits level before using it.
A passenger seat often gets less adjustment than the driver seat, so the slider handle can go unused for long stretches and seize. Work the slider through its full travel every few months and wipe grit from the track. If the seat feels loose or the lock does not engage, stop driving and inspect the bracket and bolts before continuing.
- Use a torque wrench to confirm fastener tightness
- Inspect floor mounting points for rust before installing
- Keep the seat belt path clear of the slider and bracket
Specifications
| Brand | Corbeau |
|---|---|
| UPC | 700007998091 |
| Position | Passenger side |
| Finish | Black wrinkle powder coat |
| Slider | Single locking slider standard; double locking slider optional |
| Fitment type | Direct fit |
| Fits | 2015-2017 Jeep Wrangler JK Unlimited and Rubicon Unlimited, four-door |
Vehicle fitment
It fits 2015 to 2017 JK Wrangler Unlimited and Rubicon Unlimited models, and its fitment type is direct fit. Check your year, model and trim against this range before ordering.
It fits four-door JK Unlimited and Rubicon models. Two-door Wrangler models and other Wrangler generations are not covered.
Years outside 2015 to 2017 and other Wrangler generations are not covered by this bracket description. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This bracket is a direct bolt-in fit, so it uses the existing floor bolt holes, and no welding or drilling is needed. Seat brackets hold the seat and occupant, so the bracket should match the factory mounting points before the seat is bolted down.
What’s included
One passenger side seat bracket with a single locking slider is included.
Not included: The seat itself, and the double locking slider upgrade.









