Overview
The Corbeau driver side seat bracket is a direct-bolt seat mount for the four-door 2015-2017 Jeep Wrangler JK Unlimited and Rubicon Unlimited. It is powder coated in a black wrinkle finish and comes with a single locking slider.
Direct bolt-in means the bracket attaches to the existing bolt holes in the floor, with little to no modifications. A double locking slider is available for an additional fee if you want the bar-style upgrade, which Corbeau also recommends for high-stress driving of any kind.
Key features
- Direct bolt-in design for the four-door 2015-2017 Jeep Wrangler JK Unlimited
- Bolts to the existing bolt holes in the floor with little to no modifications
- Black wrinkle powder coat finish
- Single locking slider standard
- Driver side bracket
- Double locking slider available as an upgrade, with a bar that connects the two locking sliders
- Single locking slider: pull the handle on the locking side to slide the seat forward and back
Sliders and seat adjustment
The locking slider sets how the seat moves and locks in place. A single slider uses one handle on the locking side, which works well for a driver-only setup. A double slider joins two sliders with a bar, which spreads the load and keeps both sides locking together. Choose the slider type based on how often the seat moves and how much you rely on it under hard use.
Before fitting, check that the bracket lines up with the factory floor holes and that the seat sits level. Look for cracked welds, bent brackets, or slider locks that do not engage fully, since these signs mean the assembly needs attention. Keep the locking pins and tracks clean and free of grit so they latch reliably.
- Test the lock by trying to move the seat after each adjustment
- Replace worn slider pins rather than forcing a loose lock
- Recheck the bolts after the first few trail outings
Specifications
| Brand | Corbeau |
|---|---|
| UPC | 700007998081 |
| Position | Driver side |
| Finish | Black wrinkle powder coat |
| Slider | Single locking slider standard |
| Fitment type | Direct fit |
| Model years | 2015-2017 Jeep Wrangler JK Unlimited, four-door |
Vehicle fitment
This driver side bracket fits 2015 to 2017 JK Wrangler Unlimited and Rubicon Unlimited models, and its fitment type is direct fit. Match your year, model and trim before ordering.
It fits four-door JK Unlimited and Rubicon models. Two-door Wrangler models and other Wrangler generations are not covered.
Other Wrangler generations such as TJ, LJ and JL, and JK years outside 2015 to 2017, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bracket bolts into existing floor holes, no drilling or welding is needed. Seat brackets carry occupant weight, so do not install one that does not line up with the vehicle’s factory mounting points.
What’s included
One driver side seat bracket with a single locking slider is included.
Not included: The seat itself, and the double locking slider upgrade, which is available for an additional fee.









