Overview
The Safe Jack Universal Combination Stabilizer, part number S/J97M-UCS48, is a base plate system that creates a stable platform for jacks. The universal base plate is the foundation, and insert plates change to suit different jacks. It works with a variety of bottle jacks or a Hi-Lift type farm jack.
Key features
- Universal base plate as the foundation
- Interchangeable insert plates for different jacks
- Works with a variety of bottle jacks and Hi-Lift type farm jacks
- Intended for RV, 4×4, SUV, service truck and farm use
Platform setup and stability
A stabilizer spreads the load of a jack over a larger area, which helps on soft ground such as gravel, dirt or mud. Setting the base plate on firm ground and choosing the correct insert plate are the two steps that most affect how stable the platform will be. Keep the jack centered on the plate and avoid tilting the lift, since a sideways load can push the jack off the platform.
Farm, RV and service vehicle use often means lifting heavier loads on uneven ground, so check the platform before each lift. Clean dirt and grit from the base plate and insert plates after use, and store the pieces together so none is lost. Replace or repair any worn or bent part before using the stabilizer again.
- Use on firm ground where possible
- Match insert plate to jack
- Keep jack centered on the plate
- Clean and store all pieces together
Specifications
| Brand | Safe Jack |
|---|---|
| Part number | S/J97M-UCS48 |
| Component | Universal base plate |
| Insert plates | Interchangeable |
| Jack types | Bottle jacks, Hi-Lift type farm jack |
Vehicle fitment
Not vehicle-specific. It is a jack platform, so it is matched by jack type and insert plate rather than by model year or trim.
Installation notes
Build the platform in order: start with the base plate, then add the insert plate that fits your jack. Changing insert plates takes only a couple of seconds.
What’s included
Check the included parts against your jack before setting up the platform.









