Overview
The Rugged Ridge 13201.01 is a driver side seat riser bracket for the 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7, 1981–1985 Jeep Scrambler and 1987–1995 Jeep Wrangler YJ. It is meant to replace worn seat risers.
The black riser is designed for attaching seat sliders, which are not included. The sliders attach to any aftermarket or OE Jeep seat, and the riser retains a flip forward easy entry feature.
Key features
- Driver side, labeled Front Left
- Retains a flip forward easy entry feature
- Black finish
- Designed for attaching seat sliders, which are not included
- Intended as a replacement for worn seat risers
Before you buy
Seat risers raise the seat base so the occupant sits at a comfortable height over the floor and the transmission tunnel. Over time the risers can wear, bend or lose their bolt holes, which makes the seat rock, sit low or slide unevenly. Replacing them is a practical job for a driver who notices the seat has settled to one side or no longer locks firmly in position. Before you start, look at the floor pan under each riser for rust, since a bracket that bolts to weak metal will not hold a seat securely.
When choosing a riser, match it to the seat it will carry. Sliders, seat frames and mounting bolts must line up with the riser’s holes, so measure the existing setup before you remove anything. If your seat already has an aftermarket slider, confirm that its mounting pattern matches the new bracket. Many owners replace risers in pairs, so the other side can be inspected at the same time. After installation, tighten the fasteners, check that the seat locks at each position, and recheck the bolts after the first few drives.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13201.01 |
| UPC | 804314056506 |
| Position | Front Left (driver side) |
| Color | Black |
| Type | Seat riser bracket |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR) and the 1987–1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport).
The list does not include Wrangler TJ, JK or later models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Seat sliders are not included and must be attached to these risers. The sliders fit any aftermarket or OE Jeep seat.
What’s included
The kit is the driver side riser bracket only. Check the package contents against your installation before starting.
Not included: the seat sliders.









