Overview
It is a passenger side, front right seat riser bracket for 1976-1986 Jeep CJ7 and 1987-1995 Jeep Wrangler (YJ) vehicles. It sets the seat mounting position. Seats bolt to a seat track slider, not to the bracket itself.
The bracket does not include mounting hardware. A seat track slider, part 5125501, must be purchased in addition, and it is required to mount any seat to this bracket.
Key features
- Passenger side, front right position
- Designed for use with a seat track slider
- Seats bolt to the slider, not the bracket
- Without existing sliders, new holes must be drilled into the bracket
Fitting a seat to the bracket
A seat riser raises or repositions the seat so it sits correctly against the controls and the steering wheel. On older CJ and YJ bodies, the riser sets the seat height and position over the floor, and the seat then bolts to a seat track slider. Keeping the slider and bracket aligned matters because a misaligned setup can make the seat feel loose or hard to adjust.
Before you start, check the floor and the seat frame for rust or flexing. Test-fit the slider on the bracket before tightening hardware, and make sure the seat locks fully in every position. Recheck the bolts after the first few drives, since vibration on older Jeeps can loosen fasteners.
- Confirm the slider is the correct part before drilling
- Use hardware rated for the seat load
Specifications
| Brand | Bestop |
|---|---|
| Part number | 51254-01 |
| UPC | 77848061562 |
| Position | Front right (passenger side) |
| Type | Seat bracket |
| Mounting hardware | Not included |
| Required slider | Seat track slider, part 5125501, purchased separately |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list names 1976-1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and 1987-1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport).
It is designed for 1976-1986 Jeep CJ7 and 1987-1995 Jeep Wrangler (YJ) models. Check fit against your vehicle’s year, model and trim before buying for any other Wrangler generation.
Installation notes
Mounting hardware is not included, so bolts for the seat and bracket must be sourced separately. If you do not already have seat track sliders, new holes will need to be drilled into the bracket before the seat can be mounted.
What’s included
Passenger side seat riser bracket, part 51254-01.
Not included: Mounting hardware and the seat track slider, part 5125501.









