Overview
The KC HiLites Gravity LED Fog Light Kit in black, part number 432, is a rectangular LED driving and fog light for universal use, not tied to a specific vehicle. The G34 LED light uses 2 high-power Gravity LEDs to produce both driving and fog beam patterns that conform to SAE and ECE specifications.
KC says its patented GRD (Gravity Reflective Diode) system connects every lumen from the LEDs to its precision-machined optical reflectors, which are designed with optical CAD software and prioritize street-legal beam patterns.
Key features
- G34 LED light with 2 high-power Gravity LEDs
- Driving and fog beam patterns that conform to SAE and ECE specifications
- Patented GRD (Gravity Reflective Diode) system
- Precision-machined optical reflectors
- Clear lens
- Rectangular light shape with bracket mounting
- Supplied as a single light
Aiming an auxiliary light
An auxiliary light works best when it is aimed with the vehicle loaded as it normally runs, because weight changes the height of the beam. Set the aim so the beam lights the road without throwing glare into oncoming traffic. Mount it securely so vibration does not shift the aim, and re-aim after any change to suspension height or tires.
Mounting position matters too. Keep the lens clear of mud and debris, and place the light where the bracket can be reached for adjustment. Wiring should run through a switch with its own fuse, so the light can be turned off quickly and the circuit stays protected.
- Aim with the vehicle loaded normally
- Keep the lens clean and undamaged
- Use a switch with its own fuse
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 432 |
| UPC | 84709004323 |
| Product type | LED fog and driving light |
| Bulb type | LED |
| Lens color | Clear |
| Light shape | Rectangular |
| Mounting type | Bracket |
| Size | 0″ to 10″ |
| Quantity | Single |
| Beam standards | SAE and ECE |
| Fit type | Universal |
Vehicle fitment
It is universal fit and not tied to a vehicle. The mounting location, wiring and aim are up to the installer.
This light is not vehicle-specific. Confirm that the mounting location, bracket and wiring suit your vehicle before ordering.
Installation notes
Disconnect the vehicle battery before electrical work and wire the light using a fuse or circuit breaker rated for the load. Route wiring away from heat, sharp edges and moving parts, and protect each connection from moisture. Check local regulations on auxiliary lighting before driving, and re-check mounting hardware after the first miles of use.
What’s included
One LED fog light, supplied as a single unit with bracket mounting.
Not included: Wiring harness, switch and relay, so plan to supply those parts separately.


















