Overview
The Rugged Ridge Aluminum Valve Stem Caps in black, part number 16715.26, are a set of 5 aluminum caps for car, truck and SUV wheels. The set covers four wheels plus the spare, and the caps are universal fit.
Rugged Ridge presents the caps as a finishing touch for a wheel and tire combination, whether the vehicle runs aftermarket custom wheels or the factory rims. The company says they are a step up from the black plastic valve stem caps found on most wheels, and that the same style is available in a red or black aluminum finish.
Key features
- Black aluminum valve stem caps
- 5 caps included, so the spare is covered
- Suits aftermarket custom wheels or factory rims
- Aluminum replacement for black plastic caps
- Universal fit
Valve stem care
The valve stem is a small rubber and metal part that seals the tire, and the cap is a second seal that keeps dirt, road salt and moisture out of the valve core. Caps do not hold air on their own, so a leaking valve should be dealt with by checking the core and stem. Keep caps on whenever the wheels are off the vehicle.
Rubber valve stems can crack over time, especially on older tires or wheels that see heat and cold cycles. Look at the stem base for cracks while checking pressure and replace the stem when it shows splits. Replacing stems at tire service is a common time to refresh caps as well.
- Check cap threads for damage before fitting
- Clean the valve threads before threading the cap
- Replace cracked valve stems rather than reusing them
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 16715.26 |
| UPC | 804314297213 |
| Product type | Valve stem caps |
| Material | Aluminum |
| Color | Black |
| Quantity | 5 caps per set |
| Fitment type | Universal fit |
Vehicle fitment
These caps fit any vehicle because they attach to the tire valve stem and do not depend on year, make or model.
The same caps are also offered by the manufacturer in red aluminum; this part number is the black set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Valve stem caps thread onto the tire valve stem by hand; avoid overtightening and keep the threads clean.
Check tire pressure with a gauge while the old caps are off, then fit the new caps afterward so they keep dirt out of the valve.
Fit a cap on the spare as well, as the set provides a fifth cap for that purpose.
What’s included
A set of 5 black aluminum valve stem caps.
Not included: tires, wheels, valve stems or a tire pressure gauge.












