Overview
The 17235.01 is a 2-position rocker switch rated at 20 amps for most aftermarket accessories. It is universal fit, so it is not tied to a specific vehicle.
It is heavy duty with marine grade construction and illuminates when it is in the ON position, so you can see when the accessory circuit is powered.
Key features
- 2-position rocker design
- 20-amp rating for most aftermarket accessories
- Illuminates in the ON position
- Heavy duty, marine grade construction
- Available in four colors: Red, Blue, Green and Amber
Choosing a switch for accessories
A 2-position rocker is a simple way to run an accessory, but the load behind it decides how it should be wired. Accessories with motors or heavy lamps often need a relay so the switch only handles a small coil current. Check the accessory’s rated draw against the switch rating and leave some headroom so the switch is not operating at its limit every day.
Fuse each accessory circuit separately, sized to the wire and the load it protects. Keep the terminal connections tight and clean, and check them every few months, since vibration on off-road trips can loosen posts. If a switch becomes warm to the touch, stop using it and check the wiring for a poor connection.
- Use a relay for motor or heavy lamp loads
- Fuse each accessory circuit separately
- Check terminal posts for looseness regularly
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 17235.01 |
| UPC | 804314227722 |
| Switch type | 2-position rocker |
| Current rating | 20 amps |
| Terminals | 3 post terminal |
| Illumination | Lit in the ON position |
| Available colors | Available in Red, Blue, Green or Amber; confirm the color for this part number before ordering. |
Vehicle fitment
The 17235.01 is universal fit and is not vehicle-specific. It is meant for accessory circuits, so the main thing to check is that the accessory’s draw stays within the 20-amp rating.
Installation notes
With a 3 post terminal layout, match the post labels to your accessory wiring before connecting power.
What’s included
The switch is universal fit, not vehicle-specific. Accessory draw should stay within the 20-amp rating.









