Overview
The Energy Suspension 8.5118G is a front sway bar bushing set for a 27mm bar, made in black polyurethane. It fits the 1995–2000 Toyota Tacoma and the 1996–1997 Toyota 4Runner.
Polyurethane bushings are an alternative to factory rubber, which can soften and wear over time. The bushings are greaseable through zerk type fittings, and internal channels carry lubricant to the moving surfaces.
Key features
- Front sway bar bushings for a 27mm bar
- Black polyurethane material
- Zerk fittings for periodic lubrication
- Channels that guide grease to the moving parts
- Fits two Toyota models, the 1996–1997 4Runner and the 1995–2000 Tacoma
Bushing wear and replacement
Sway bar bushings hold the bar to the frame and let it rotate as the suspension moves. Over time the bushing material compresses, cracks or wears through, and the bar can start to knock or feel loose over bumps. Replacing the pair together keeps both sides matched, which helps the bar work evenly through a turn or a washboard section. On vehicles driven on trails, the bushings take steady abuse from dirt, water and grit, so inspecting them at every tire rotation is a practical habit.
Polyurethane bushings resist compression better than rubber but feel stiffer, so some drivers notice a firmer ride on rough pavement. Greasing the zerk fittings at regular intervals helps the bushings move smoothly and reduces squeaks. Before installation, check the end links and bar mounting hardware for wear, since loose links are often mistaken for worn bushings. Remove all old rubber and clean the mounting surfaces so the new set seats properly.
- Inspect bushings for cracks, splits or flattening
- Grease zerk fittings as part of routine service
- Check end links for play before replacing bushings
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 8.5118G |
| UPC | 703639402961 |
| Position | Front |
| Bar diameter | 27mm |
| Color | Black |
| Material | Polyurethane |
| Lubrication | Greaseable, zerk type fittings |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer list covers the 1996–1997 Toyota 4Runner (Base, Limited, SR5) and the 1995–2000 Toyota Tacoma (Base, Limited, Pre Runner, SR5).
4Runner years outside 1996–1997 and Tacoma years outside 1995–2000 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a front sway bar bushing set in black polyurethane. Check the package contents against your installation before starting.












