Overview
The Rock-Slide Engineering R-SE Rock-Slider in black is a steel rock slider that guards the rocker area of 4-door models. It is sold under part number SL-4D-100-JK and is made in the USA from 3/16 steel alloy plate.
The guard is a formed plate design with a standoff and a black powder coat finish. Installation requires cutting or drilling, and installation instructions are included.
Key features
- Formed plate guard with standoff
- 3/16 steel alloy plate construction
- Black powder coat finish
- Made in the USA
- Installation instructions included
Rocker guard basics
A rock slider sits along the rocker panel and takes impacts from rocks and stumps that would otherwise dent the body or crack the floor. Its steel plate and standoff spread the load across the frame, which is why solid mounting points matter as much as the plate itself. Good clearance under the rocker keeps the guard working when the vehicle flexes off-road.
Cut and drill with care. Measure twice, mark lines clearly, and deburr every cut edge before paint. Touch up raw steel with a matching primer and paint to slow rust, especially at drilled holes where water can collect. Use the included instructions for hole placement and fastener sizes, and confirm the plate sits square before final tightening.
After trail use, check the bolts and welds for loosening or cracks, and retighten fasteners that have worked free. Keep an eye on the powder coat near the standoff, since rubbing rock can chip it first.
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | SL-4D-100-JK |
| UPC | 887753115287 |
| Material | 3/16 steel alloy plate |
| Finish | Black powder coat |
| Design | Formed plate guard with standoff |
| Body style | 4-door models only |
| Installation type | Cutting or drilling required |
| Made in | USA |
Vehicle fitment
The product is labeled Direct Fit and limited to 4-door models, but no model years, chassis codes or trims are named, so fitment is not confirmed for any vehicle.
Two-door versions are not covered by this 4-door note. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is required, so prepare the mounting holes only after reading the included instructions. Check the fit against your vehicle before making any cuts.
What’s included
Installation instructions are included with the slider. Check the package contents for hardware before starting the installation.












