Overview
The Rock Slide Engineering EZ Rack Single Add-On Plate, part number RSEAC-TR-102S-1, is one extra plate for the EZ Rack carrier, used to store fuel or accessories.
The plate is made of 11-gauge steel with a textured black topcoat over an acid-etched base. It is prepared with an automated powder coating system. It fits any tire size, and its weight capacity depends on the rating of the tire carrier it is mounted to.
Key features
- Single plate add-on for the EZ Rack
- 11-gauge steel construction
- Acid-etched base with textured black topcoat
- Fits any tire size, per the brand
- Weight capacity set by the tire carrier’s rating
Loads and carrier rating
A tire carrier add-on plate adds storage, but the carrier sets how much it can safely hold. Before adding fuel cans, recovery gear or other accessories, read the rating on the carrier and keep the total load within it. Plates mounted to a carrier also add weight at the rear, which affects braking, steering and tire wear, so distribute loads low and close to the centerline. Re-check the mounting hardware after the first few trips, especially on rough roads.
Steel plates tolerate road use when the finish is intact. Scratches down to bare metal can start rust, so touch up any chips and keep the surface clean. Check the carrier mounts and the plate fasteners periodically for looseness, and replace any bent brackets. If the carrier is used with a spare tire, make sure the plate does not interfere with the spare tire’s movement or the tailgate.
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | RSEAC-TR-102S-1 |
| Material | 11-gauge steel |
| Finish | Textured black topcoat over acid-etched base |
| Max tire size | N/A |
| Tire size fit | Any size, per the brand |
| Weight capacity | Set by the tire carrier’s rating |
Vehicle fitment
It attaches to the EZ Rack carrier and is designed as a universal fit. Confirm the carrier is compatible before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate is an add-on, so check your tire carrier’s rating before adding loads, since the plate’s capacity follows the carrier.
What’s included
One single add-on plate for the EZ Rack. Check the package contents against your installation before starting, including any fasteners you need.
Not included: the EZ Rack tire carrier this plate attaches to.










