Select your vehicle
-13%

4 Wheel Parts Factory Tacoma Tire Carrier Mount – 61450W

4 Wheel Parts

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Tire carrier mount for the 2016–2021 Toyota Tacoma
  • 6×5.5 lug pattern; rated for a spare up to 35 inches
  • For 4WP Swingout Accessory Gates 61449DW or 61449PW

Description

Overview

The 4 Wheel Parts Factory Tacoma Tire Carrier Mount, part number 61450W, is a black powder-coated bracket that carries a full-size spare on the 2016–2021 Toyota Tacoma. It is made for a 6×5.5 lug pattern and is rated for a spare up to 35 inches.

The carrier mount attaches to the 4WP Factory Swingout Accessory Gates, part numbers 61449DW or 61449PW, rather than to the truck directly.

Key features

  • Fits the 2016–2021 Toyota Tacoma
  • Made for the 6×5.5 lug pattern
  • Rated for a spare tire up to 35 inches
  • Black powder coat finish
  • Mounts to the Factory Swingout Accessory Gates 61449DW or 61449PW

Carrying a full-size spare

A full-size spare adds noticeable weight to the rear, so think about how it changes load, braking and handling. Mount the spare securely with the carrier’s fasteners and check that it cannot rock or rattle. A spare that is kept clean and inflated is ready when needed, so check its pressure and tread during routine maintenance.

Before carrying a spare, confirm its bolt pattern matches the mount’s 6×5.5 pattern, since a mismatched wheel will not seat properly. Covers help keep mud, sun and road grime off the tire, which slows sidewall cracking. Recheck the carrier hardware after rough trails, and make sure the tire does not catch on the swingout gate when it opens.

  • Check spare pressure before long trips
  • Inspect the tire for cracks and dry rot
  • Confirm the carrier bolts are tight after bumpy drives

Specifications

Brand 4 Wheel Parts
Part number 61450W
Product type Tire carrier mount
Lug pattern 6×5.5
Maximum spare tire size 35 inches
Finish Black powder coat
Works with 4WP Factory Swingout Accessory Gates 61449DW or 61449PW
Fit type Direct fit

Vehicle fitment

The Factory Tacoma Tire Carrier Mount, part 61450W, fits the 2016–2021 Toyota Tacoma in SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, Limited and Trail trims.

Fitment runs through the 2021 model year, so this mount does not cover later years. The 6×5.5 lug pattern must match your spare wheel. Make sure your truck’s year, model and trim match before ordering.

Installation notes

The carrier mount attaches to a Swingout Accessory Gate, 61449DW or 61449PW, so one of those gates must be installed first.

What’s included

The tire carrier mount.

Not included: the Swingout Accessory Gate and the spare tire and wheel.

Fitment

VehicleYearsTrims
Toyota Tacoma2016–2021Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What size spare does the 61450W tire carrier mount hold?

4 Wheel Parts rates the mount for a spare up to 35 inches, so a full size spare can ride with the truck.

What lug pattern is the 61450W made for?

The tire carrier mount is made for a 6x5.5 lug pattern, so the spare wheel you plan to carry should have that same bolt pattern.

What does the 61450W attach to?

It mounts to the 4WP Factory Swingout Accessory Gates, part numbers 61449DW or 61449PW, and is not a stand-alone carrier that bolts straight to the truck.

How often should a carried spare be checked?

Check the spare's air pressure and condition during regular maintenance and before long trips. Look for sidewall cracking, uneven wear and any damage from debris. Make sure the carrier fasteners are tight and the tire seats cleanly on the mount.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon