Overview
The Rigid Industries IR Series D2 Drive Light, part number 502393, is a driving light supplied as a set of 2. Rigid Industries marks it universal fit, so it is not built around one vehicle model.
Confirm the beam pattern, LED count and wattage against your driving needs before buying.
Driving light placement
Driving lights are usually mounted low on a bumper or high on a bar, and each position changes the beam pattern and glare. A lower mount gives close, wide light, while a higher mount reaches farther down the road. Choose a position with solid attachment points that will not flex on rough ground.
Wiring is a common point of failure, so run each light through a fused relay and keep the connections sealed. Check the wiring route for heat, sharp edges and moving parts, and secure it with clips. After the first trips, look over the mount, the aim and the connectors for signs of loosening.
- Mount on a solid bumper or bar
- Secure wiring with clips and loom
- Recheck aim after the first few trips
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 502393 |
| UPC | 849774024641 |
| Series | IR Series |
| Model | D2 Drive |
| Quantity | Set of 2 |
Vehicle fitment
No vehicle is named for this driving light. It is universal fit, so mounting position and wiring for your own vehicle need checking before installing.
What’s included
A set of 2 IR Series D2 Drive Lights.









