Overview
The Rhino-Rack Tie Down Straps (3m), part number RTD3, are 3m / 10ft straps for keeping a load stable and protected while a vehicle is moving. Rhino-Rack USA describes them as universal fit, so they are not made for one specific vehicle, roof rack or cargo system. They suit cargo you want held in place with a fixed, metal-buckled strap instead of stretchable cords.
The straps are a fixed, metal-buckled alternative to stretchable bungee style cords. The 25mm / 1-inch polyester webbing is heavy duty and resists ripping or fraying. The metal buckle gives secure fastening, and the lashing capacity is 225kg / 496lb. The straps come in one 3m / 10ft length, so the main decision is whether that length reaches your anchor points.
Key features
- 25mm / 1-inch polyester webbing that is heavy duty and resists ripping or fraying
- Metal buckle for secure fastening
- Lashing capacity of 225kg / 496lb
- 3m / 10ft strap length
- Presented as a safer alternative to stretchable bungee style cords
Choosing straps for a load
Fixed straps behave differently from elastic cords. Bungee style cords stretch and rebound, which can throw a load around as the vehicle moves, while a polyester strap with a metal buckle holds its length once tensioned. That makes the strap a better fit for cargo that must stay put, though it still needs to be snug and routed so the load cannot shift against it.
Routing matters as much as the strap itself. Keep the webbing clear of sharp edges, which can cut it, and use edge protection where needed. Tension can settle after loading, so check the buckle again once the vehicle has been moving for a short while and at each stop.
- Route straps clear of sharp edges
- Use edge protection over corners
- Recheck tension after the vehicle has moved
- Keep bungee cords away from roof racks
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RTD3 |
| Length | 3m / 10ft |
| Webbing | Polyester, 25mm / 1-inch |
| Buckle | Metal |
| Lashing capacity | 225kg / 496lb |
Vehicle fitment
It is a universal fit strap, so it is not designed for a specific vehicle, roof rack or cargo system. Check that the 3m / 10ft length reaches your mounting points and that the 225kg / 496lb lashing capacity covers your load.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep bungee style cords away from Rhino-Rack roof racks, since the racks are not covered by warranty when used with bungee style cords. Secure the load before the vehicle moves.
What’s included
The package contains the 3m / 10ft tie down straps. Check the package contents against your installation before starting.









