Overview
The Rhino-Rack Cam Buckle Tie Down Kit, part number 43179, is a set of cam buckle straps for the Rhino-Rack Pioneer system. It lets you strap down items to the Pioneer system quickly, since the straps have loops on the ends.
The mounting blocks are low profile to reduce wind resistance and install into the C-Channels of the Pioneer system. The kit is for the Pioneer system, so fitment is tied to that system rather than a vehicle.
Key features
- Cam buckle straps with loops on the end for quick tie-down
- Low profile mounting blocks designed to minimize wind resistance
- Mounts into the C-Channels of the Pioneer system
- Designed as a pickup kit for the Pioneer system
Tie-down straps and wind
Cam buckle straps are quick to tighten and release, which suits loads that change between trips. Check each strap for fraying, stiff buckles and worn loops before every journey, and replace any strap that shows damage. Keep the webbing away from sharp corners on the load.
Low profile mounting blocks reduce wind resistance compared with taller fittings, but they still need to sit firmly in the channels. Remove dirt and grit from the C-Channels before fitting, and check that the blocks stay tight after rough roads.
Load weight and wind force add stress to every tie point. Spread the load across the system where possible, and secure long items at both ends. Check straps again after the first few miles, since they can settle as the load shifts.
- Inspect straps for fraying before each trip
- Clean the C-Channels before fitting blocks
- Recheck straps after the first few miles
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | 43179 |
| Mounting | C-Channels of the Pioneer system |
| Mounting blocks | Low profile |
| Strap ends | Loops |
| Compatible with | Rhino-Rack Pioneer system |
Vehicle fitment
Check that the Pioneer system suits your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting blocks install into the C-Channels of the Pioneer system. Follow the Pioneer system’s installation steps before fitting the blocks.
What’s included
The kit includes cam buckle straps with loops and low profile mounting blocks.
Not included: The Pioneer system itself, which the mounting blocks attach to.









