Overview
The Rhino-Rack SRG Vortex Ratchet Grab is a 2m black strap with a stainless steel ratchet, designed to fasten a load to roof racks through a Rhino-Rack Vortex crossbar.
The ratchet grab feeds through the channel of a Vortex crossbar and has high grade webbing with a PE coated steel hook on the end. Rhino-Rack recommends pairing it with the Vortex Eye Bolt (S604), which is listed separately.
Key features
- Stainless steel ratchet grab
- 2m black strap with high grade webbing
- PE coated steel hook on the strap end
- Feeds through the channel of a Rhino-Rack Vortex crossbar
Securing loads on a roof rack
A ratchet grab used with a crossbar channel depends on the crossbar and the mounting beneath it. Before tightening, check that the grab runs smoothly through the channel and that the crossbar is firmly fixed to the roof rack. Keep the load centred between supports where possible so the strap pulls evenly.
Webbing on roof-rack straps is exposed to sun and road spray, so inspect it after trips and before storage. Clean the ratchet mechanism when it picks up grit, and avoid running the strap over sharp edges. Retighten the strap after the first stretch of driving, since loads can settle as the vehicle moves.
- Check the crossbar is firmly fixed
- Keep the load centred between supports
- Inspect webbing for sun damage
- Retighten after the first stretch of driving
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHOSRG |
| Strap length | 2m |
| Strap colour | Black |
| Strap material | High grade webbing |
| Hook | PE coated steel |
| Ratchet | Stainless steel |
| Recommended companion | Vortex Eye Bolt (S604), not included |
Vehicle fitment
It is universal fit, but the ratchet grab depends on a Vortex crossbar on your roof rack. Confirm that your roof rack uses Vortex crossbars before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Feed the ratchet grab through the channel of the Vortex crossbar before tightening the strap. Rhino-Rack recommends using the Vortex Eye Bolt (S604) with it, and that eye bolt is not supplied with the grab.
What’s included
The ratchet grab comes as a single unit with its 2m strap and hook.
Not included: Rhino-Rack Vortex Eye Bolt (S604).









