Overview
The Rhino-Rack RTDH3 Tie Down Strap with Hook is a 3m (118 inches) strap for strapping down accessories when used with Rhino-Rack Eye Bolt Kits.
The hook secures the strap to fixtures up to 25mm in diameter or to mesh wire. It is a universal fit, so no vehicle model applies.
Key features
- Hook grips fixtures up to 25mm in diameter
- Hook also secures loads to mesh wire
- Designed for use with Rhino-Rack Eye Bolt Kits
- Strap length of 3m / 118 inches
Anchor points and hook seating
The hook works best when it seats fully on a clean fixture that matches its opening. Before tensioning, check that the hook sits flat and cannot slip off under movement. Avoid hooking onto thin or damaged fixtures, since a weak anchor can fail even when the strap itself is in good shape.
Mesh wire anchors need a different approach from a solid bar, because the hook can rock or catch on the grid. Use padding where the strap crosses edges, and keep the webbing away from hot exhaust parts. Recheck the hook and strap after the first short drive, since loads can settle and a hook can work loose.
- Confirm the hook is fully seated
- Avoid thin or corroded fixtures
- Pad the strap over sharp edges
- Recheck tension after the first drive
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORTDH3 |
| Strap length | 3m / 118 inches |
| Hook attaches to | Fixtures up to 25mm in diameter or mesh wire |
| Compatible with | Rhino-Rack Eye Bolt Kits |
| Fitment | Universal Fit |
Vehicle fitment
It is not a vehicle-specific part. Its use depends on the accessories and anchor points you secure.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the strap with a Rhino-Rack Eye Bolt Kit, since the product is designed to work with those kits. Check that the hook seats on a fixture up to 25mm in diameter or on mesh wire before tensioning the strap.
What’s included
Check the package contents against your installation before starting. Plan to have a Rhino-Rack Eye Bolt Kit on hand, since the strap is designed to work with those kits.









