Overview
The Rhino-Rack USA Quick Mount Pioneer 10mm Spacer, part number RHOQMPS10, lets you fit the range of Rhino-Rack Pioneer systems to RLT600 Quick Mount Legs. The spacers included cover two legs, and no vehicle fitment is listed.
Most Pioneer systems need between 4 and 8 legs, so work out how many spacers your system requires before fitting.
Key features
- 10mm spacer for Pioneer systems
- Spacers cover two legs
- Connects Pioneer systems to RLT600 Quick Mount Legs
- Part of the Rhino-Rack Quick Mount range
Counting legs for a Pioneer setup
Pioneer systems use a set number of legs depending on the vehicle and rack layout, so counting the mounting points is the first job. A spacer kit that covers two legs has to be repeated until every leg position is matched, which is why the total leg count drives the order.
Once the spacers are in place, check that each one sits square and that the bar seats evenly across them. Uneven spacers can make the rack feel loose or cause noise at speed. Tighten fasteners in a sequence and recheck them after the first few trips to make sure nothing has settled out of place. Keep spare fasteners and note which spacer went where so the setup can be repeated when the rack is refitted.
- Count every leg position first
- Recheck tightness after the first trips
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHOQMPS10 |
| Thickness | 10 mm |
| Legs covered | 2 |
| Compatible legs | RLT600 Quick Mount Leg |
| Legs needed per Pioneer system | 4 to 8 |
Vehicle fitment
No vehicle fitment is listed. The spacer is a roof rack part for Pioneer systems on RLT600 legs, so it is not written for a particular make, model or year.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Most Pioneer systems need 4 to 8 legs, so check the leg count for your system and fit enough spacers to match it.
What’s included
Spacers for two legs.
Not included: Pioneer systems and RLT600 Quick Mount Legs.









