Overview
The Rhino-Rack RCP Fixed Mount Base Kit, part number RHORCP-JB, is a base that is permanently riveted to a roof. It acts as a fixed mounting point for roof rack systems that use RVL, RVH or RCPLK legs.
Because the base is riveted in place, placement is a one-time decision. It is a Universal Fit kit.
Key features
- Permanently riveted base for a fixed roof mount
- Works with RVL, RVH or RCPLK legs
- Acts as a fixed mounting point for roof rack systems
- Universal Fit designation
Before you rivet
A riveted base stays where it is fitted, so mark the position carefully and check it against the roof load area and the rack you intend to use. Measure from fixed reference points on the roof rather than relying on memory, and confirm the base will clear any roof features such as gutters, antennas or channels.
After fitting, look over the rivet points for corrosion or water entry, especially on bare metal edges. Sealing the joints where moisture could collect helps prevent problems later. Recheck the legs and fixings after the first few trips, since a rack that moves on its base will wear the surrounding roof panel.
- Mark the base position before drilling
- Check the roof for features that could clash
- Inspect rivet points for corrosion
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORCP-JB |
| Category | Exterior Parts |
| Mounting | Permanently riveted to the roof |
| Compatible legs | RVL, RVH or RCPLK |
| Fitment | Universal Fit |
Vehicle fitment
The base is Universal Fit, so it is matched to roof rack systems with compatible legs rather than a vehicle model.
Confirm that your roof rack legs are RVL, RVH or RCPLK before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Settle placement before fitting, since the base is fixed by riveting. Gather the tools and rivets you need before starting.
What’s included
The fixed mount base kit. Check the package contents for rivets and other hardware before starting.
Not included: Roof rack legs. The base is a mounting point for RVL, RVH or RCPLK legs, which are needed separately.









