Overview
The Rhino-Rack RCP Base Kit, set of six (RCP03-BK), supplies the molded pads and other components needed at the fixed mounting points on a vehicle roof for a Rhino-Rack RC or RV roof rack. The set covers six mounting points, enough for a whole rack rather than a single base. It fits the 2003 to 2009 Lexus GX470 (Base).
Key features
- Set of six base kits
- Molded pads that attach to the fixed roof mounting points
- Works with Rhino-Rack RC and RV roof rack systems
Care and inspection
Roof base pads sit between the vehicle roof and the rack, so their condition affects how the whole system holds. Before fitting, clean the roof contact area and make sure the pads are free of dirt, oil and grit. Uneven or gritty pads can slide, scratch paint or allow movement at the mounting points.
After installation, check the pads and fixings at the start of a trip and again after rough roads. Replace any pad that is cracked, hardened or flattened, as worn pads reduce the grip the rack needs. Keep the set together so that all six pads wear and are replaced at the same time.
- Check fixings after the first short drive
- Look for cracks or flattening
- Clean roof contact points before fitting
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORCP03-BK |
| Quantity | Set of six |
| Pad type | Molded pads |
| Used with | Rhino-Rack RC and RV roof rack systems |
Vehicle fitment
It fits the 2003 to 2009 Lexus GX470. The pads attach to the fixed mounting points on the roof of that vehicle.
Other Lexus models and years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A set of six RCP base kits with molded pads and the other components for the kit.









