Overview
The Revtek 762 is a 2 inch front leveling kit with coil spring spacers for the Ram 1500. The spacers are cast aluminum with a polished finish, and the kit is a front lift only.
The 2 inch system keeps the vehicle within its OEM suspension geometry and needs no cutting or welding. Installation is a bolt up process.
Key features
- 2 inch front lift
- Cast aluminum construction for long durability
- It works within the OEM suspension geometry.
- No cutting or welding necessary
- Bolt up installation
- Super heavy-duty plated and powder coat components
Cast aluminum and daily use
Coil spring spacers sit between the spring and its seat, so they raise the front without changing the springs themselves. Cast aluminum is a common spacer material because it is light and resists corrosion well in many conditions, but a polished finish shows dirt, road grime and scratches more easily than a painted one. Cleaning the spacers during routine service keeps the finish looking good and makes it easier to spot cracks or damage.
Spacers carry the weight of the front end, so inspect them along with the factory springs at each service. Look for hairline cracks, bent seats and loose fasteners, especially after rough off-road use or hard impacts. Replace any spacer that shows damage rather than trying to repair it. Because the front is raised, check tire clearance and schedule an alignment after installation, and retighten the fasteners after the first drives.
- Clean the polished finish with mild soap
- Look for hairline cracks around the spacer edge
- Retorque fasteners after the first drives
- Confirm steering clearance after the lift
Specifications
| Brand | Revtek |
|---|---|
| Part number | 762 |
| UPC | 811323010276 |
| Lift | 2 inches, front |
| Front lift method | Coil spring spacers |
| Spacer material | Aluminum |
| Finish | Polished |
Vehicle fitment
Check your year and trim against the covered range before ordering.
What’s included
The kit includes front coil spring spacers with plated and powder coated components. Check the included hardware against your installation plan before starting.









