Overview
The Recon 60 Inch White Lightning Tailgate Light Bar, part number 26416, is a white and red LED light bar that mounts in the space above the bumper and below the tailgate or rear door. Recon sells it as universal fit for nearly every pick-up truck and SUV sold in the U.S., and names Nissan, Toyota, Dodge, Chevy/GMC, Ford and Hummer among the makes it is built for.
The bar combines a white reverse light with red running, parking, brake, hazard and turn signal functions in one housing. Light bars like this help drivers behind a truck see braking and signaling from farther back. The bar is street legal and has been approved by the National Highway Traffic Safety Administration.
Key features
- White reverse light plus red running, parking, brake, hazard and turn signal functions
- Brake lights are 6x brighter than the running lights
- 3mm diode LED technology, which Recon contrasts with small SMD-type LEDs
- Plug and play installation into a standard flat 4-pin trailer light connector
- Optional hard-wired connection to factory taillight wiring for a permanent install
- Extra strong 3-M adhesive tape mounting
Choosing a light bar setup
A tailgate light bar is only as useful as its wiring and mounting. The plug-in route suits most owners because it uses an existing flat 4-pin trailer connector and avoids splicing into the truck’s electrical system. The hard-wired route is better for a permanent install, but it means connecting to factory taillight circuits, so plan that work before you start.
Before choosing a mounting spot, measure the clear space above the bumper and below the tailgate or rear door on your own vehicle. Clean and dry the surface before the adhesive goes on, because tape needs a firm bond to hold a bar in a place that sees road spray and vibration. Recheck the tape and the bar position periodically.
Specifications
| Brand | Recon |
|---|---|
| Part number | 26416 |
| UPC | 182852000671 |
| Product line | White Lightning |
| Length | 60 inch |
| Color | White and red |
| LED type | 3mm diode LED |
| Functions | White reverse; red running, parking, brake, hazard and turn signal |
| Connection | Standard flat 4-pin trailer light connector, or hard-wired to factory taillight wiring |
| Mounting | 3-M adhesive tape, above the bumper and below the tailgate or rear door |
| Street legal | Yes |
Vehicle fitment
It is a universal fit, so it is not tied to a specific year, make or model. Fit depends on clear space above the bumper and below the tailgate or rear door, and that space varies between trucks and SUVs. Measure it on your vehicle before ordering.
Because the bar is universal, no vehicle is excluded by name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
There are two wiring routes. The plug-in method uses the standard flat 4-pin trailer light connector, while the hard-wired method connects to existing factory taillight wiring for a permanent install. Choose the method before you start, because the hard-wired route means working with vehicle wiring. Check any wiring work against your vehicle’s wiring information before the lights are energized.
What’s included
The light bar, its functions and its mounting method are described here. Not included: Check the package contents against your installation before starting, including any hardware or wiring harness.
















