Overview
The Rampage 960137 Tailgate Light Bar, part number 960137, is a universal-fit LED bar for trucks, mini trucks and SUVs. It sits in the recessed gap between the tailgate and bumper and installs without drilling.
High intensity LED illumination comes from long life Superbrite bulbs. The housing is injection molded and waterproof, with rubber end seals bonded with silicone, so the bar is water resistant. It can also give the rear of the vehicle a finished look.
Key features
- High intensity LED illumination with Superbrite bulbs
- Installs without drilling, using 3M adhesive foam tape
- Flat four plug-in hitch connector for the trailer hitch
- Heavy gauge wiring with fuse protection
- Injection molded, waterproof housing
Adhesive mounting and hitch power
Adhesive foam tape spreads load across the mounting surface, which is why the bar can be attached without drilling. The result depends on preparation: the surface should be free of wax, oil and loose paint, and it should be at a moderate temperature when the tape goes on. Adhesive takes time to reach full strength, so avoid washing the vehicle or loading the tailgate heavily in the first period after mounting.
Hitch-powered lights draw power through the trailer hitch plug, so the plug and its contact pins matter. Keep the connector dry and free of road grime, and inspect the seal and wiring after rough driving. A fused circuit protects the wiring if something shorts, and the fuse should be checked whenever the light stops working. Rear-facing light rules vary by location, so review them before use.
- Remove wax and oil before applying the tape
- Keep the hitch plug free of grit
- Recheck the bar after the first trail run
Specifications
| Brand | Rampage |
|---|---|
| Part number | 960137 |
| UPC | 873563006020 |
| Light source | Superbrite LED bulbs, SMT technology circuit board |
| Wiring | Heavy gauge, flat four hitch plug, fuse protected |
| Seals | Rubber end seals bonded with silicone |
| Mounting | 3M adhesive foam tape, no drilling |
| Fitment | Universal fit and mounting |
Vehicle fitment
This light bar is universal and is not built for one vehicle. Its intended use is the rear of trucks, mini trucks and SUVs, so check that your recessed tailgate area suits the bar before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adhesive foam tape holds the bar, so skip drilling and prepare the mounting surface first. Power comes through the hitch plug, which is fuse protected, and local rules apply to rear-facing lights.
What’s included
Heavy gauge wiring and a hitch connector with fuse protection are included. Check the box contents before installing.









