Overview
The Rampage 960135 Tailgate Light Bar, part number 960135, is a universal-fit LED light bar for Rampage truck, mini truck and SUV tailgates. It fills the recessed space between the tailgate and the bumper and is designed to mount without drilling, using durable VHB tape.
High intensity LED illumination comes from Superbrite LED bulbs. The lighting is faster and brighter, and the injection molded housing is waterproof, with rubber end seals bonded with silicone.
Key features
- High intensity LED illumination
- Mounts without drilling using VHB tape
- Plug-in flat four hitch connector for the trailer hitch
- Heavy gauge wiring with fuse protection
- Waterproof, injection molded housing
- Universal fit and mounting
Hitch wiring and tape mounting
A hitch-powered tailgate light relies on a plug-in connection, so the hitch plug and its contact points need to stay clean and dry. Road spray and dust can work into the connector over time, which is why a periodic check of the plug is useful. Keep a spare fuse on hand, and use a fuse of the rating marked in the wiring to avoid overloading the circuit.
Adhesive foam mounting works best on smooth, clean surfaces at moderate temperatures. Clean the area with a solvent suited to automotive surfaces, let it dry fully, and press the bar firmly while the adhesive bonds. Over the long term, check the tape edges for lifting after rough trails or car washes, and reseat the bar if any edge begins to pull away.
- Clean the mounting surface with a suitable solvent
- Keep a spare fuse with the vehicle’s kit
- Check the hitch plug for dirt and corrosion
Specifications
| Brand | Rampage |
|---|---|
| Part number | 960135 |
| UPC | 873563006006 |
| Light source | Superbrite LED bulbs, SMT technology circuit board |
| Wiring | Heavy gauge, flat four plug-in hitch connector, fuse protected |
| Housing | Injection molded, waterproof, rubber end seals bonded with silicone |
| Mounting | VHB tape, also known as 3M adhesive foam tape, mounts the bar without drilling. |
| Fitment | Universal fit and mounting |
Vehicle fitment
This light bar is universal and is not built for a single vehicle. It is designed for the recessed space between the tailgate and bumper on trucks, mini trucks and SUVs, so check that your rear area has that gap before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar attaches with adhesive tape, so the mounting surface needs to be clean and dry before the tape is pressed on. The hitch plug and fused wiring connect to the existing trailer hitch, and local rules for rear-facing lights apply.
What’s included
The wiring includes heavy gauge cable, a flat four hitch connector and fuse protection. Check the box contents before installing.









