Overview
The Rampage tailgate light bar, product number 960134, is a 60-inch LED light bar that fills the recessed space between a truck, mini truck or SUV tailgate and the bumper. It is universal fit and universal mounting.
It uses high intensity Superbrite LEDs in a five-function layout with brake lights, left and right turn signals, and flasher and running lights. The housing is injection molded and waterproof, with rubber end seals bonded with silicone.
Key features
- Five functions: brake, left and right turn signals, flasher and running lights
- Superbrite LED bulbs, which Rampage says give brighter, faster lighting response
- Installed without drilling using durable VHB tape
- Plug-in flat four hitch connector with fuse protection
- Heavy gauge wiring
- Injection molded, waterproof body with silicone-bonded rubber end seals
- High quality SMT circuit board
Wiring and tailgate light bar setup
A tailgate light bar combines brake, turn and running functions in one strip, so the wiring needs to be routed carefully. Run the cable along the existing harness path, keep it clear of the tailgate hinge and latch, and secure it with clips so it does not rub. Testing each function before closing everything up saves a lot of trouble later.
Adhesive tape works best on clean, dry surfaces at a comfortable temperature. Press the bar firmly and give the tape time to bond before putting load on the connection. Periodically check the bar’s seal and the tape edges, since road grime and heat can soften adhesive over time. Clean the lens gently to keep the output bright.
- Test brake, turn and running functions before closing up
- Keep the cable clear of the tailgate hinge
Specifications
| Brand | Rampage |
|---|---|
| Part number | 960134 |
| UPC | 873563005993 |
| Length | 60 in |
| Lighting | Superbrite LED, 5 function with brake |
| Turn signals | Left and right |
| Connector | Plug-in flat four hitch connector |
| Housing | Injection molded, waterproof |
| Mounting | 3M adhesive foam tape (VHB tape) |
| Fitment type | Universal fit and mounting |
Vehicle fitment
It is universal fit and mounting, so it is not built for one make, model or year. Measure the recessed space between the tailgate and the bumper on your vehicle before buying.
Measure the recessed space between the tailgate and the bumper on your own vehicle first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar mounts without drilling using durable VHB tape. Its heavy gauge wiring ends in a plug-in flat four hitch connector that fits an existing trailer hitch plug, with fuse protection included. Clean the mounting area before applying the tape, and confirm local rules on rear-facing lights before use.
What’s included
The package is the light bar itself, so check the connector and tape when it arrives.









