Overview
The Omix-ADA 16523.71 is a rear inner CV boot kit for the 2011-2014 Jeep Grand Cherokee WK, fitting the driver or passenger side rear axles. Omix-ADA says to use 16523.70 for the rear outer position.
Omix-ADA says its replacement parts meet or exceed OE standards for fit and reliable performance. The position field for this kit reads left inner.
It fits either the driver or passenger side rear inner joint, so one purchase covers whichever side needs a boot.
This is a CV boot kit, meaning the rubber boot and its hardware rather than the whole axle shaft. Confirm the clamps and grease match your installation before starting. It fits the 2011-2014 Grand Cherokee WK, and the trims are shown below.
Because the rear axles have an outer and an inner joint, each with its own boot kit, it matters to pick the correct one. This part is for the rear inner location, and Omix-ADA points to 16523.70 for the outer. The rear axles on both sides are covered, so one part number serves the driver and passenger sides.
Omix-ADA adds that it offers high-quality replacement parts that meet or exceed OE standards for a great fit and reliable performance.
Key features
- CV boot kit for the rear inner position
- Driver or passenger side rear axles
- For the 2011-2014 Grand Cherokee WK
- Direct fit
- Rear outer position uses 16523.70
Inner joint service tips
The inner joint sits closer to the differential and is protected from road spray, but it still takes angle changes and collects grease when the boot splits. Torn inner boots often show up as grease flung onto the rear frame area or the underside of the vehicle. Inspect both joints when one boot fails.
Clean all old grease from the joint and inspect the balls and cage for pitting before refilling. Use only the grease supplied with the kit, and pack it so the boot can flex without tension. Fit the clamps firmly and check the boot for twists after moving the suspension through its travel. Keep the work area clean, since dirt is a common cause of early joint wear. A quick road test after the repair helps confirm the boot is seated.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16523.71 |
| UPC | 804314294045 |
| Product type | CV boot kit |
| Location | Rear inner |
| Side | Driver or passenger side |
| Position (as cataloged) | Left inner |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2011-2014 Grand Cherokee WK only.
- 2011–2014 Jeep Grand Cherokee (WK) (Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit)
The list covers one generation. The earlier ZJ and WJ and the later Grand Cherokee are not on it, and the outer boot is a separate part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This boot belongs on the inner joint; the outer joint takes 16523.70.
What’s included
One rear inner CV boot kit. The kit is the boot and its hardware only.











