Overview
The Rampage 960136 is a tailgate light bar for Rampage trucks, mini trucks and SUVs, and it is a universal fit. It lights the gap between the tailgate and the bumper and attaches with 3M foam tape instead of fasteners.
Inside, the light relies on high intensity LEDs and long life Superbrite bulbs for a quick response. The circuit board uses SMT construction, and the housing is injection molded and waterproof, sealed at the ends with silicone-bonded rubber.
Key features
- Superbrite LED bulbs for a brighter, faster response
- Attaches with 3M foam tape, no drilling
- Plug-in hitch connector that wires into the existing trailer hitch
- Fuse protection on the heavy gauge wiring
- Waterproof, injection molded housing
- Universal fit and mounting
Wiring and foam tape care
A tailgate light bar sits where road spray, dust and repeated tailgate movement reach it, so the mounting area and wiring need periodic checks. Before longer trips, look at the foam tape edges and the cable run near the hitch. Lifting at the edges or a cracked wire jacket means the bar should be re-seated or the wire replaced.
A hitch-fed light depends on clean, tight connections. A loose plug or corroded pin can make the bar dim or cut out, so wipe the connector with a dry cloth and keep it seated. If you add other rear accessories, consider their combined electrical load against the wiring already in place, and keep the fuse protection intact after any change.
- Inspect foam tape edges after rough trails
- Keep the hitch plug clean and dry
- Recheck the fuse after any wiring work
Specifications
| Brand | Rampage |
|---|---|
| Part number | 960136 |
| UPC | 873563006013 |
| Light source | High intensity LEDs with Superbrite bulbs |
| Circuit board | SMT technology |
| Connector | Flat four plug-in hitch connector |
| Housing | Injection molded, waterproof, rubber end seals bonded with silicone |
| Mounting | 3M adhesive foam tape, no drilling |
| Fitment | Universal fit and mounting |
Vehicle fitment
Because the bar is universal fit, no year, make or model applies. Fit depends on the recessed space between the tailgate and bumper of your truck, mini truck or SUV, so measure that area before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Foam tape mounting means the surface should be clean before the tape goes on. Wire the bar through the hitch connector and its fuse protection, and check local rules for rear lights.
What’s included
The package includes heavy gauge wiring with a plug-in flat four hitch connector and fuse protection. Check the package contents against your installation before starting.









