Overview
The Rampage H4 headlamp conversion kit, part 5089925, is a pair of headlight housings that replace dim standard headlight bulbs with H4 conversion lighting. Each housing has a solid clear glass lens, and the kit includes two H4 55/60W bulbs.
The kit is a direct replacement and provides 60% more luminescence. It is D.O.T. approved. No specific vehicles are named, so confirm your headlight setup before ordering.
Key features
- Durable die-cast aluminum housings
- Solid clear glass lens
- Two H4 55/60W bulbs included
- Rampage cites 60% more luminescence
- D.O.T. approved.
- Rampage cites a 10 minute installation
Before you convert headlights
A headlight conversion changes more than the bulb. The housing sets the beam pattern, so the new unit has to sit at the same height and angle as the one it replaces. Measure the mounting points and the space behind the headlight before buying, and check that the wiring connector lines up without strain. A housing that sits even slightly out of position can throw light into oncoming traffic.
After installation, aim is the step most people skip. Park on level ground facing a wall, measure the height of the headlight centers, and adjust the aim screws until the beam sits at the right level. Keep the lens clean and free of scratches, because haze and damage reduce output. Recheck the aim after the first few drives, since mounting brackets can settle.
- Measure the mounting points before ordering
- Check the connector fit before tightening
- Aim the beam on level ground
Specifications
| Brand | Rampage |
|---|---|
| Part number | 5089925 |
| UPC | 873563006518 |
| Housing material | Die-cast aluminum |
| Lens | Solid clear glass |
| Bulbs | 2 x H4 55/60W |
| Fitment type | Direct Fit |
| Approval | D.O.T. approved |
Vehicle fitment
It is a direct fit for H4 headlights, but no vehicles, years or models are named. Check that your current headlights take an H4 bulb before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation is a 10 minute job that needs only a screwdriver. Disconnect the battery before working on headlight wiring.
What’s included
A pair of die-cast aluminum housings with solid clear glass lenses, and two H4 55/60W bulbs.


















