Overview
The Recon Projector Headlights, part number 264194BK, are black projector headlights sold as a set. They use H1 style bulbs for both low beam and high beam, and come with 4 standard halogen bulbs already installed.
It is a headlight assembly with halo, LED, while the included bulbs are halogen. Verify the year, model and trim against your vehicle before buying.
Key features
- Projector style headlight in black
- H1 style bulbs for low beam and high beam
- 4 standard halogen bulbs already installed
- Sold as a set
- Headlight assembly with halo, LED; included bulbs are halogen
Projector headlight basics
A projector headlight uses a lens and a small reflector to focus the beam into a tight cutoff pattern. Halo rings add a light ring around the lens, and they run on their own wiring, separate from the low and high beam circuits. Because the halo and the beams share a housing, the connectors and grounds need the same care as the main lamp circuit.
H1 style bulbs use a specific base, so check the connector against your harness before swapping anything. Halogen bulbs run hot and should be handled by the base only, with clean hands. After installation, aim each unit on a wall or level surface, and recheck aim after bumps, since a small shift changes where the beam lands.
- Match the H1 base and connector before swapping
- Handle halogen bulbs by the base only
- Aim both sides after installation
- Inspect the lens for haze or cracks
Specifications
| Brand | Recon |
|---|---|
| Part number | 264194BK |
| UPC | 810614012425 |
| Color | Black |
| Bulb type | H1 style, low beam and high beam |
| Bulbs included | 4 standard halogen |
| Quantity | Sold as a set |
| Product type | Headlight assembly w/ Halo – LED |
Vehicle fitment
The entry carries a universal fit label and names no vehicle, make, model or year. Headlight assemblies are sized to specific vehicles, so fitment is not confirmed here.
Compare the housing dimensions and mounting points with your vehicle’s manufacturer specifications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the H1 style bulb connectors to your existing harness before swapping, and wire any halo or auxiliary lighting through a fused relay.
What’s included
A set of projector headlights with 4 standard halogen bulbs already installed. Check the wiring harnesses and mounting hardware against your installation before starting, since they are not part of the set.









