Overview
The Pro Comp Pro Runner Dual Steering Stabilizer Kit, part number 222581Z, is a complete dual kit that includes shock cylinders and a bracket. It fits the 1999 Ford F-250 and the 1999 to 2004 Ford F-250 and F-350 Super Duty.
This Pro Runner stabilizer is designed to improve handling, cut wheel vibration and reduce bump steer from oversized tires.
Key features
- Dual steering stabilizer setup
- Complete kit with shock cylinders
- Bracket included
- Pro Runner line
Dual setup basics
A dual steering stabilizer setup places two shock cylinders across the front axle, usually one on each side of the steering linkage. Two cylinders share the damping load, so steering gets more even resistance when a truck runs over rough ground or carries heavier tires. The brackets set the mounting angle, which is part of what makes the pair work together.
When fitting a dual kit, check the tie rods, drag link and pitman arm for wear before mounting anything new. A worn joint can make one side of the setup work harder than the other. Look for leaks on the cylinder bodies, cracked rubber and loose hardware after the first few drives. Tighten the bracket bolts to the torque called for by the fastener specifications and re-check them after the first trail run.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222581Z |
| UPC | 614901036343 |
| Type | Dual |
| Contents | Shock cylinders and bracket |
| Completeness | Complete kit |
Vehicle fitment
It fits these Ford trucks:
- 1999 Ford F-250
- 1999 to 2004 Ford F-250 Super Duty
- 1999 to 2004 Ford F-350 Super Duty
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Shock cylinders and a bracket, as a complete dual kit.









