Overview
The Pro Comp 12114 is a pair of teal poly-vinyl shock boots. Each boot covers the chrome-hardened piston rod of a shock absorber and keeps dirt, dust, mud and other contaminants off it, which helps extend the life of the shock.
The boots are sold as a pair. They are labeled universal fit, but a boot has to match the shock it protects.
Keeping boots clean
Shock boots work best when the rod is clean before the boot goes on. Wipe the exposed rod with a cloth and remove any caked grit, since trapped debris can scratch the chrome surface beneath the boot. A clean rod also makes it easier to see whether the seal is leaking.
Teal makes the boot stand out against darker shock bodies, which can help during routine checks. Look over the seams, the lip that seals against the shock, and the boot material for cuts or stiffness. Replace any boot that no longer holds its shape or sits loosely.
Some drivers pair boots with a rod inspection every few trips, especially after deep water or sandy runs. Water can sit under a boot and speed up corrosion, so letting the boot dry out before storage is a good habit. Shock boots are inexpensive relative to a shock rebuild, so replacing a worn pair early is a sensible step.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 12114 |
| UPC | 614901020670 |
| Color | Teal |
| Material | Poly-vinyl |
| Sold as | Pair |
| Fit | Labeled universal fit |
Vehicle fitment
It is a universal fit. Check the boot against your shock’s piston rod diameter before ordering, and confirm your vehicle’s year, model and trim before buying.
What’s included
A pair of teal poly-vinyl shock boots.
Not included: the shock absorbers the boots protect.















