Overview
The Pro Comp PLC09100 is a 2.5-inch poly lift leveling kit with polyurethane coil spacers in a black finish. It lifts the front only. Pro Comp describes its poly lift kits as one of the simplest ways to gain the extra height needed to clear oversize tires without giving up ride comfort.
It fits the 1994 to 2001 Dodge Ram 1500, the 1994 to 2010 Dodge Ram 2500 and 3500, and the 2011 to 2012 Ram 2500.
Key features
- 2.5-inch front lift
- Polyurethane coil spacers
- Black finish
- Front lift only
- Direct fit design
Poly spacers and ride feel
Polyurethane spacers resist road salt and common fluids, but they can crack, flatten or take a set over years. When the front is apart for brake or steering work, look at the spacers and replace any that show damage. Spacer height is set by the design, so swapping to a different lift height is a separate choice.
Oversize tires put more load on ball joints, wheel bearings and the front bump stops. Inspect these parts before adding taller tires, since worn components can make a lift feel loose. Keep the front shocks in good condition, because they control the spring after the height change.
- Look for cracks in the spacers
- Check front bump stops for wear
- Inspect ball joints before big tires
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PLC09100 |
| UPC | 614901127492 |
| Type | Coil spring spacer |
| Front lift height | 2.5 inches |
| Front lift method | Coil spring spacers |
| Spacer material | Polyurethane |
| Finish | Black |
| Position | Front |
Vehicle fitment
Fits 1994 to 2001 Dodge Ram 1500 models, 1994 to 2010 Ram 2500 and 3500 models, and 2011 to 2012 Ram 2500 models. Other Ram model years are not covered. Check fit against your vehicle’s year, model and trim before ordering.
The 2002 to 2010 Ram 1500 and the 2013 and later trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.









