Overview
The Pro Comp 9300 is a light harness switch kit for fog or driving lights. It supplies the wire, a fusible link and a switch panel with one rocker switch.
The kit is universal and isn’t matched to a vehicle, so the lights and their mounting you choose set the rest of the installation.
Key features
- Wire included
- One fusible link
- Switch panel with one rocker switch
- Universal fit
Wiring auxiliary lights
Auxiliary lights draw more current than a dash lamp, so wiring should be planned from the battery to the switch. A fusible link near the power source protects the wire if a fault occurs. Route the harness away from hot exhaust parts, moving linkage and sharp edges, and secure it with clips so it does not chafe. Keep the ground connection short and bolted to clean bare metal.
Many setups add a relay so the switch carries only a small current while the lights draw from the battery through the relay. Select lights and wire gauges that suit the load you plan to run, and recheck connections after rough trails. Use a weatherproof connector where wire enters the cabin or runs through the body. Test the switch and lights before final mounting, since correcting a wiring mistake is easier before the harness is hidden.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 9300 |
| UPC | 614901080650 |
| Switches | 1 rocker switch |
| Fusible links | 1 |
Vehicle fitment
This light harness is not vehicle-specific. It is universal fit, so the lighting you run through it determines the wiring length and mounting needs.
Installation notes
The kit includes a fusible link, which belongs in the feed to the switch. Check your area’s rules for auxiliary lights before using them on public roads.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Wire, one fusible link and a switch panel with one rocker switch. Not included: the lights and their mounting brackets.














