Overview
The Pro Comp lateral traction bars (part number 72501B) are sold in pairs for lifted Dodge Ram 2500 and 3500 trucks. They reduce axle wrap while keeping ground clearance and suspension articulation. They fit the 2003 to 2010 Dodge Ram 2500 and 3500 and the 2011 to 2012 Ram 2500 and 3500.
The bars are finished in black powder coat. They are engineered for a specific vehicle fit and bolt on. The matching mounting kit is required and sold separately.
Key features
- Reduces axle wrap on lifted trucks
- Keeps ground clearance and suspension articulation
- Vehicle-specific engineering for a bolt-on fit
- Sold in pairs
- Black powder coat finish
Mounting kit and Ram fit
Ram 2500 and 3500 trucks run heavy rear axles, and a lifted setup changes the driveline angles enough that axle wrap becomes a real concern under load. Traction bars keep the axle centered so those angles stay within a manageable range. Their effect is most noticeable when towing or launching from a stop, where the axle would otherwise rotate under torque.
The mounting kit is a separate purchase, so plan for it early. Inspect leaf springs and shock mounts before fitting, since worn parts let the axle move even with bars installed. Check frame-side mounts for corrosion, and confirm the bars do not touch the fuel tank, brake lines or exhaust at full suspension travel.
- Inspect leaf springs and shock mounts
- Check frame mounts for corrosion
- Confirm clearance at full suspension travel
- Recheck mounting hardware after the first loaded trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 72501B |
| UPC | 614901127355 |
| Type | Lateral traction bar |
| Quantity | Pair |
| Color | Black |
| Mounting | Bolt-on; mounting kit sold separately |
Vehicle fitment
They fit the 2003 to 2010 Dodge Ram 2500 and 3500 and the 2011 to 2012 Ram 2500 and 3500, in several trims from Laramie to SLT and ST. Make sure your year, model and trim match before ordering.
The Ram 1500 and the 2013 and later Ram 2500 and 3500 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bars bolt on, but the mounting kit that attaches them to the vehicle is sold separately. Confirm the mounting kit matches your Ram model and year before ordering the bars.
What’s included
A pair of lateral traction bars in black powder coat.
Not included: the traction bar mounting kit, sold separately.








