Select your vehicle

Fabtech Floating Rear Traction Bar System (Blue) – FTS62003BK

Fabtech

$841.21In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 7:20 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the manufacturer-listed 1999–2008 Ford F-250 and F-350 Super Duty and 2000–2004 Ford Excursion
  • Part number FTS62003BK, blue floating rear traction bar system
  • Sold as a pair with a hardware kit and mounting brackets
  • Designed to reduce rear leaf spring axle wrap caused by lift blocks and oversized tires
  • Requires minimum 3 inch lift blocks for proper clearance

Description

Overview

The Fabtech FTS62003BK is a blue floating rear traction bar system for Ford Super Duty trucks, sold as a pair with a hardware kit and mounting brackets. It is designed to reduce rear leaf spring axle wrap caused by lift blocks and oversized tires, and the manufacturer fitment list covers the 1999–2008 Ford F-250 and F-350 Super Duty and the 2000–2004 Ford Excursion.

The shackle system lets the bars move with the arched travel of the Super Duty rear axle. The design allows a non-binding, smooth highway ride while still resisting torque loads and supporting tire traction.

Key features

  • Floating shackle system that follows the arched travel of the rear axle
  • Positive resistance to torque loads, which helps reduce axle wrap
  • Built for trucks running lift blocks or oversized tires
  • Bolt-on mounting with a direct fit design
  • Includes hardware kit and mounting brackets
  • Blue finish

Understanding axle wrap

Axle wrap happens when the rear axle rotates under torque and the leaf springs twist. Lift blocks, oversized tires and heavy engines all increase the force that causes it. Traction bars limit that rotation while allowing the axle to follow the arch of the springs, so the rear end can still move over uneven ground without binding the rest of the suspension.

Before installing traction bars, check the leaf springs, U-bolts, shackles and bump stops for wear, since axle wrap stresses all of them. Carrier bearing vibration can have several causes, so traction bars may not fix every vibration. If vibration continues, look at driveshaft angles and the carrier bearing itself.

  • Check leaf spring packs for shifting or cracks
  • Inspect shackle bushings for play
  • Look at U-bolt torque after the first drives
  • Measure lift block height before installing

Specifications

Brand Fabtech
Part number FTS62003BK
UPC 674866010239
Color Blue
Mounting Bolt-on
Fitment type Direct fit
Sold as Pair
Included hardware Hardware kit and mounting brackets
Minimum lift block height 3 inch blocks

Vehicle fitment

The manufacturer fitment list includes these vehicles: 2000–2004 Ford Excursion (Eddie Bauer, Limited, XLS, XLT); 1999–2008 Ford F-250 Super Duty (FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT); and 1999–2008 Ford F-350 Super Duty (FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT).

Super Duty trucks from 2009 onward and F-450 or F-550 models fall outside this fit. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Use at least 3 inch lift blocks for proper clearance, so measure your current block height before installing. Carrier bearing vibration may continue on some vehicles even after the bars are installed.

To use the bars with Fabtech rear leaf springs or AMP steps, add Bracket Kit FABFTS92025.

What’s included

Hardware kit and mounting brackets, sold as a pair.

Not included: Bracket Kit FABFTS92025, which Fabtech says to order when using the traction bars with Fabtech rear leaf springs or AMP steps.

SKU: FABFTS62003BK Category:

Specification

Shipping weight 82.80 lbs
Package dimensions 67.80 × 12.50 × 5.50 in
brands

Fitment

VehicleYearsTrims
Ford Excursion2000–2004Eddie Bauer, Limited, XLS, XLT
Ford F-250 Super Duty1999–2008FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2008FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is the Fabtech FTS62003BK?

The Fabtech FTS62003BK is a blue floating rear traction bar system, sold as a pair with a hardware kit and mounting brackets. It is designed to reduce rear leaf spring axle wrap on Ford Super Duty trucks caused by lift blocks and oversized tires.

Will the FTS62003BK fit a 2005 Ford F-250 Super Duty?

Yes, the manufacturer fitment list includes the 1999–2008 Ford F-250 Super Duty in the FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. Confirm your year and trim before ordering.

Does this kit work with Fabtech rear leaf springs or AMP steps?

No. Using the traction bars with Fabtech rear leaf springs or AMP steps requires Bracket Kit FABFTS92025, which is ordered separately.

How much lift block height is needed?

A minimum of 3 inch lift blocks is needed for proper clearance. Measure your current block height before installing, and confirm it meets that minimum.

Can traction bars replace a rear lift block?

No. Traction bars control axle wrap and torque response, but they do not change the ride height that lift blocks provide. The bars still need enough block height for clearance, so measure before installing.

How often should the traction bar bushings and shackles be inspected?

Inspect them at tire rotations and after hard off-road use. Look for cracked rubber, play at the pivot, or loose hardware, and retighten or replace parts as needed.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon