Overview
The Pro Armor 11-inch Off-Road Spot Light Bar, part number A16UL165, is a spot-pattern LED light bar for UTVs. A spot pattern concentrates light into a narrower, longer beam than a flood.
The bar uses 3-watt CREE LEDs and puts out 1800 lumens. Its housing is bezel-free, and it is rated IPX67 for waterproof and rustproof use.
Key features
- Off-road spot pattern
- 3-watt CREE LEDs
- 1800 lumens of output
- Bezel-free design
- IPX67 certified waterproof and rustproof
- Deutsch quick-disconnect wiring
- Stainless U-shaped mounting system included
Choosing a spot bar’s role
Spot bars earn their place when the job is seeing far down a trail or across an open field. The narrow beam reaches out instead of filling the area near the machine, so it pairs well with a flood bar mounted lower on the same frame. Think about the trails you ride most often, since a spot-only setup can leave close obstacles dim.
Mounting height and angle decide how useful the beam is. A bar set too low lights only the ground in front of the wheels, while a bar tilted too far up wastes output. Aim it so the hot spot falls where you need to look, and check the aim again after the brackets have been tightened.
Wiring and maintenance follow the same routine as any LED bar. Use a fused relay for the harness, keep connections sealed, and wipe the lens after dusty or muddy runs. Look for loose brackets, cracked lenses and any moisture inside the housing, since those are early signs that the unit needs service.
- Pair a spot bar with a flood bar for close-in light
- Aim the hot spot where you need to see
- Check brackets after rough trails
Specifications
| Brand | Pro Armor |
|---|---|
| Part number | A16UL165 |
| Size | 11-inch |
| Beam pattern | Spot |
| LED type | 3-watt CREE |
| Output | 1800 lumens |
| Waterproof rating | IPX67 |
| Wiring | Deutsch quick disconnect |
| Fitment | Universal (not vehicle-specific) |
Vehicle fitment
The spot light bar is a universal part and is not tied to one make, model or year. Confirm where it will mount on your UTV before drilling, since it can be positioned in a variety of locations.
Installation notes
Fuse the harness at the battery end and route it through a relay, and check local rules before using the bar on public roads.
What’s included
The stainless U-shaped mounting system and Deutsch quick-disconnect wiring come with the bar.
Not included: a switch, relay or fuse.









